MRV Communications AE092FCAHA, AE182FCAHA manual New concrete slab

Page 24

Installation procedure

Installation of indoor unit

Installing the suspension screw:

Use M8 or M10 suspension screws (4, prepared in the field) (when the suspension screw height exceeds 0.9 m, M10 size is the only choice). These screws shall be installed as follows with space adapting to air conditioner overall dimensions according to the original building structures.

Wooden structure

A square wood shall be supported by the beams and then set the suspension screws.

Square wood

Suspension

screw

New concrete slab

Beam

To set with embedded parts, foundation bolts etc.

Iron reinforcement

Foundation bolt

Knife embedded part

Guide plate embedded part

Pipe suspension foundation bolt

Original concrete slab

Use hole hinge, hole plunger or hole bolt.

Steel reinforcement structure

Use steel angle or new support steel angle directly.

Hanging bolt

 

 

 

Suspension screw

Support steel angle

Hanging of the indoor unit

Fasten the nut on the suspension screw and then hang the suspension screw in the T slot of the suspension part of the unit.

Aided with a level meter, adjust level of the unit within 5 mm2.

23

Image 24
Contents AE092FCAHA AE182FCAHA Page Page AE092FCAHA AE182FCAHA Remote controller Part descriptionClock Set Important Points of Safety Smell etc. occurs, stop running Important Points of Safety Operating instructions Recommended operation mode Operating instructions COOL, DRY, Heat operationTimer ON/OFF function Cancel Timer modeTimer ON-OFF operation Operation Mode Sleep functionTroubleshooting Following cases are not troublesSystem couldnt start Is power on/off switched on? When fault occurs Poor cooling or heatingPoor cooling Information about application Installation precautions Installing tools Installation procedure Pipe expansion dimensions as followsElectrical requirements Pipe cutting and expandingInstallation procedure Choosing the installation location Installation of indoor unit Figure showing installation dimensions unitmmAir supply duct New concrete slab Installation of remote controller Remove the back cover of the remote controllerMount the back cover of the remote controller Installing the remote controllerDrain pipe RequirementsInsulation treatment Refrigerant piping Allowable pipe length and drop Pipe material and sizeSupplementary refrigerant RequirementVacuum pumping Open all valvesGas leakage detection CElectric wiring Clamping method of the connection wire Wire connection for built-in indoor unitRing terminal connection method Straight terminal connection methodField setting Field setting the unit numberIndoor unit number setting Matrix of the dial switch and indoor unit numberList of troubles Installation check and trial operation Wrap with the protective plastic tape

AE092FCAHA, AE182FCAHA specifications

MRV Communications has established itself as a leader in the field of networking solutions, and among its impressive product lineup, the AE182FCAHA and AE092FCAHA stand out as robust fiber optic devices designed to meet the demands of modern network architectures. These devices are particularly tailored for enterprise and service provider environments where high-speed data transmission and reliability are paramount.

The AE182FCAHA is engineered to handle complex networking needs with a combination of high throughput and advanced routing capabilities. It supports multiple protocols, which enables seamless integration into existing infrastructures. This device is capable of delivering up to 10 Gbps of throughput, ensuring that even the most data-intensive applications run smoothly. With its built-in redundancy features, the AE182FCAHA also assures minimal downtime, a critical aspect for mission-critical operations.

Similarly, the AE092FCAHA offers a compelling solution for medium to large-scale networks, focusing on simplified management and high-performance. This device is designed to facilitate bandwidth-intensive applications such as video streaming and large database transactions, with a capacity that supports up to 1 Gbps. It employs sophisticated Quality of Service (QoS) features that prioritize latency-sensitive traffic, making it ideal for real-time communication platforms.

A standout characteristic of both devices is their use of advanced optical technologies. Equipped with DWDM (Dense Wavelength Division Multiplexing), they can transmit multiple signals over a single fiber strand, vastly improving bandwidth efficiency and reducing operational costs. The use of fiber optics also enhances signal integrity over long distances, making these devices suitable for enterprises with expansive geographic footprints.

In terms of management and usability, both the AE182FCAHA and AE092FCAHA come with user-friendly interfaces that streamline configuration and monitoring tasks. Their compatibility with SNMP (Simple Network Management Protocol) allows network administrators to easily integrate them into larger management systems, ensuring proactive monitoring and quick troubleshooting.

Overall, MRV Communications' AE182FCAHA and AE092FCAHA are innovative solutions designed to meet the rigorous demands of today's networking environments, combining high performance, advanced features, and ease of management. Organizations looking to enhance their network infrastructure will find these devices to be dependable assets that support both current requirements and future expansion.