Remington 493 operating instructions Unload

Page 11

Safety Precautions

6.Power fasteners are a permanently installed fixture. An act of demolition is required for their removal. Appropriate safety precautions must be taken.

Head

Shank

Plastic Flute

482-60

7.Never use common nails or other materials as fasteners. Remington Power Fasteners are manufactured from special steel and heat treated to produce a very hard yet ductile fastener.

8.Never pry a power load out of the strip. Prying can discharge the load causing serious injury (See Troubleshooting Guide, page 23).

UNLOAD

1

2

9.If work is interrupted for any reason, remove the power load strip before removing the power fastener.

103500

11

Image 11

Contents Powder Actuated Tool RemingtonIndex ? ? Handling the Tool Safety PrecautionsPowd Know Your Fastening Base Material Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners GREEN? RED? Unload WHY a Power Fastener Holds Concrete Why a Power Fastener HoldsOverdrive Selecting Power Fasteners and Power LoadsOperation Water Key Part Description Qty Parts ListCleaning and Maintenance Separating Base Plate From Piston Sleeve Removing Rock ARM Removing Rubber PADRemoving Liner from Tool Body Removing Trigger AssemblyRemoving Firing PIN Attaching Liner to Tool Body Tool AssemblyAttaching Trigger Assembly to Tool Body Attaching Firing PIN AssemblyAttaching Rubber PAD Assembling Barrel AssemblyProblem Possible Cause Remedy Troubleshooting GuideSP Fasteners Application ChartFasteners Load Color Code Parts Central Maintenance Log Canada, Inc Limited Warranty Agreement