Operation
5.Squeeze trigger to set power fastener. Be sure to keep pressure on tool during this operation.
6.Grasp base plate and slide barrel forward rapidly until it stops. Push base plate back into liner to the closed position. This advances the power load strip and resets the piston for the next fastening.
WARNING: Do not depress muzzle of tool into barrel assembly when loading new power fastener. Live power load is in firing position.
30
WATER
7.Should the tool fail to fire, hold the muzzle firmly against the work surface for 30 seconds. Release the trigger and remove pressure on the tool while holding the muzzle against the work surface. Again press the tool firmly against the work surface and pull the trigger. If the tool still fails to fire, hold the tool firmly against the work surface for another 30 seconds before advancing the power load strip. Use remaining loads in strip. Discard power load strip into water or oil.
103500 | 15 |