Remington 493 operating instructions Safety Precautions, Handling the Tool

Page 4

Safety Precautions

WARNING

POWDER

ACTUATED !

TOOLS

IN USE

482-10

4.Always clear the work area on all sides and post appropriate warning signs on job sites.

482

5.Make sure the work area is clean from loose material and debris.

HANDLING THE TOOL

1.Never place your hand over the muzzle. Accidental discharge can cause serious injury.

2.Never place your finger on the trigger until the tool’s muzzle is against the work surface.

4

103500

Image 4

Contents Remington Powder Actuated ToolIndex ? ? Safety Precautions Handling the ToolPowd Know Your Fastening Base Material Never make fastenings in spalled or cracked areas Operating the Tool Power Loads and Fasteners GREEN? RED? Unload Why a Power Fastener Holds WHY a Power Fastener Holds ConcreteSelecting Power Fasteners and Power Loads OverdriveOperation Water Parts List Key Part Description QtyCleaning and Maintenance Separating Base Plate From Piston Sleeve Removing Rubber PAD Removing Rock ARMRemoving Firing PIN Removing Trigger AssemblyRemoving Liner from Tool Body Tool Assembly Attaching Trigger Assembly to Tool BodyAttaching Firing PIN Assembly Attaching Liner to Tool BodyAssembling Barrel Assembly Attaching Rubber PADTroubleshooting Guide Problem Possible Cause RemedyFasteners Application ChartSP Fasteners Load Color Code Parts Central Maintenance Log Limited Warranty Agreement Canada, Inc