3.Click the Install button.
4.In the Network Component Type window, select Protocol and click Add.
5.From the list of available protocols, select Internet Protocol and click OK.
6.Windows will ask you to insert the operating system disk to install other necessary files.
7.Follow the
8.Reboot if necessary.
If you are not using a DHCP server on your network, make sure that your PC and the Shared Storage Drive are in the same IP address range (Example: 192.168.1.1 to 192.168.1.254), and that they are using the same Subnet Mask (Example: 255.255.255.0).
English
2.My Shared Storage Drive is detected but I cannot see it in Network Neighborhood.
Go to Start > Search. Choose Computers or people, then
A computer on the network and then enter the name or network ID of your Shared Storage drive (Example:
The Network ID is located on the back of your
Shared Storage Drive.
In Windows 2000, go to Files and Folders and use the "Search for a Computer" option.
If that does not work, choose the Network option of the Control Panel to check that a TCP/IP protocol is installed. If it isn’t installed, use Add - Protocol - Microsoft - TCP/IP to install it. In Windows 2000, click Install, not Add.
Check the network bindings. First, make sure that the TCP/IP protocol is bound to your network card (NIC). Then, in the Control Panel, select your network card and click Properties, and select the Bindings tab. Make sure TCP/IP is bound (checked).
If you don’t have a router on your network, make sure that your PC and the Shared Storage Drive are in the same IP address range (Example: 192.168.1.1 to 192.168.1.254), and that they are using the same Subnet Mask (Example: 255.255.255.0).
If you do have a router running DHCP, check that your Gateway IP Address is set correctly. Ask your network administrator for the correct value.
4
Troubleshooting
17