Henny Penny BCM-110, BCF-24/65/110 manual Wiring Information of PC Board

Page 14

Model BCF-24/65/110, BCM-110

Wiring Information of PC Board

1-3 POWER SUPPLY

2 COMPULSORY EARTHING CONNECTION

4-5 POWER SUPPLY OUTPUT FOR ELECTRIC HEATING ELEMENT FOR DE-ICING OF THE EVAPORATOR (NOT USED)

6-7 POWER SUPPLY OUTPUT FOR BUZZER SIGNAL

8-9 POWER SUPPLY OUTPUT TO FAN(S) AND FRONT FRAME HEATER (ANTI-FOGGING) 10-11 POWER SUPPLY OUTPUT TO COMPRESSOR UNIT

12-13 12VDC OUTPUT TO ALARM BUZZER (NOT USED)

14 DISPLAY INPUTS

15-19 FRIGIPROBE INPUTS (BLACK WIRE TO 15, WIRING UNIMPORTANT FOR OTHER COLORS)

20-21 0 TO 1 VOLT OUTPUT TO GRAPHIC RECORDER : (HOTTEST FRIGIPROBE TEMPERATURE, NOT USED)

22-23 EVAPORATOR TEMPERATURE PROBE INPUTS

24-25 PHOTO-ELECTRIC RESISTOR INPUTS (NOT USED)

26-27 AIR TEMPERATURE PROBE INPUTS

2-14

603

Image 14
Contents Introduction MaintenanceMaintenance Hints COMPRESSOR, DrierRemove the electrical power to the unit Control BoardContactor Install new fan in reverse order Door Frame Heater Evaporator FANFrigiprobe AIR ProbeEvaporator Probe Fuse and Fuse Holder Condensation EvaporatorEvaporator Unit, and pull the cover down CondensationBend out the clips securing the rodent cover on the back Start Relay RUN CapacitorStart Capacitor Frequency Preventive MaintenanceProcedure Wiring Diagrams BCF/BCM-110 Wiring Diagram BCF-24/65 Refrigeration Diagram BCF-24/65 Model BCF-24/65/110, BCM-110 Electrical/Refrigeration Diagram Wiring Information of PC Board