Reference Manual for the NETGEAR Storage Central SC101
ITEM | DESCRIPTION |
| |
Ethernet Status Light (Yellow) | Ethernet LAN Link Activity Indicator |
Off | No power or no activity |
On | Powered on but no data traffic |
Blink | Data traffic |
| |
Back Description
The Storage Central SC101 front and rear hardware functions are described on the back label illustrated below.
Ethernet Status LEDs
Figure 2-2
The following table describes the rear label information:
LED | DESCRIPTION |
| |
Ethernet Status | Ethernet LAN Link Activity Indicator |
Off/ | Indicates no power or no Ethernet link detected. |
Green On | Ethernet link detected. |
Yellow Off | Indicates no power or no Ethernet link detected. |
Yellow Blink | Indicates data traffic on the Ethernet LAN. |
| |
•The power socket connects to the SC101 power adapter.
•The reset button is located between the Ethernet RJ-45 connector and the power socket.
2-4
v1.0, September 2005
Reference Manual for the Netgear Storage Central SC101
Technical Support
Product and Publication Details
V1.0, September
Contents
Appendix a Specifications
Chapter About This Manual
Audience, Scope, Conventions, and Formats
Manual Scope
How to Use This Manual
How to Print this Manual
Printing a Page in the Html View
About the Storage Central SC101
Key Features
Chapter Introduction
Support for Standards
What’s In the Box?
System Requirements
Front Description
Following table describes the front cover information
Back Description
Following table describes the rear label information
Pushed once, it reboots the SC101
Page
Chapter Installation and Basic Configuration
Installation Overview
First, Install a Hard Disk and Connect the SC101
Verify the Hard Disk Is Set to Cable Select
Install the Hard Disk
Connect the hard disk cables
Before You Begin
Next, Install the SC101 Software
Connect the SC101 to Your Network
Reference Manual for the Netgear Storage Central SC101
Now, Create Disk Space for PCs That Will Use the SC101
Using the Status Bar and Context Sensitive Help
Always restart your network in this sequence
Troubleshooting Tips
Technical Support
Check the status lights to verify correct operation
Page
Chapter Management
Storage Application Scenarios
Expanding PC Disk Storage
Easy Access to Photos, Music, or Videos
Protecting Against Data Loss
Understanding the Product Update Features
Updates Storage Central Manager Location Firmware
Page
Chapter Configuration
Configuration Option Available Tasks Comment
Using the Wizard Setup Mode
Creating a New Drive
Managing an Existing Drive
Reference Manual for the Netgear Storage Central SC101
Attaching Drives
Chapter Advanced Configuration
Using Advanced Configuration Options
Checking Storage Central Status
Creating or Managing Drives
Firmware Upgrade
View/Attach Available Drive
Page
Basic Functioning
Chapter Troubleshooting
Storage area network has no power
No lights are lit on the storage area network
Common Problems and Solutions
Frequently Asked Questions
What does the Reset button on the back panel do?
Reference Manual for the Netgear Storage Central SC101
Can I un-mirror a mirrored drive?
Restoring the Default Configuration
Appendix a Specifications
Specifications for the SC101
Page
Appendix B Related Documents