Limitations
This table lists the limitations that have been discovered in this release of SNMS.
Operating System/ | Description | |
Component Affected | ||
| ||
|
| |
IRIX | StorNext FS uses | |
| support may experience problems working with files with inode numbers | |
| greater than 2 GB. This issue is not unique to StorNext, but may be | |
| encountered by some legacy applications when working with StorNext FS. | |
|
| |
| SNMS only supports SGI | |
| use the SGI version of the QLogic QLA2200 or QLA2310 | |
|
| |
| SNMS and StorNext FS are shipped as separate, installable streams for | |
| the maintenance (m) and feature (f) releases of IRIX. You need to select | |
| the correct maintenance or feature streams of SNMS and StorNext FS. | |
| Otherwise, you will encounter problems during installation and while | |
| running the product. | |
| Use the uname | |
| • If you are using the maintenance stream of SNMS or StorNext FS, the | |
| stream is listed as 6.5.19m, 22m, or 23m. For this stream, you must | |
| install the maintenance release of SNMS or Stornext FS. | |
| • If you are using the feature stream of SNMS or StorNext FS, the stream | |
| is listed as 6.5.19f, or 22f. For this stream, you must install the | |
| feature release of SNMS or StorNext FS. | |
| • If you are using IRIX level 6.5.23, you must install the maintenance | |
| stream of SNMS or StorNext FS. | |
|
| |
| On many versions of IRIX, the root crontab contains the following entry | |
| which is used to remove old application crash dumps and temporary mail | |
| files: | |
| find / | |
| ||
| If StorNext file systems are mounted, they will be traversed by this find | |
| command which can have a dramatic impact on the performance of other | |
| applications currently using these file systems. To prevent the traversal of | |
| StorNext file systems, modify the find command so it reads: | |
| find / | |
| '(' | |
| exec rm | |
|
|
20 | September 2004, ADIC |