Figure 4. Cabling an SC100/SC120 Expansion Enclosure to an SCv2000/SCv2020 Storage System
1. | Storage system | 2. | Storage controller 1 |
3. | Storage controller 2 | 4. | SC100/SC120 expansion enclosure 1 |
5.SC100/SC120 expansion enclosure 2
Connecting the Power Cables
Connect power cables to the expansion enclosure.
1.Make sure that the power switches on the expansion enclosure are in the OFF position before connecting the power cables.
2.Connect the power cables to the power supplies in the expansion enclosure chassis.
Figure 5. Power Cables
3.Secure each power cable to the expansion enclosure chassis using the strain relief fasteners.
4.Plug the other end of the power cables into a grounded electrical outlet or a separate power source such as an uninterrupted power supply (UPS) or a power distribution unit (PDU).
6