Installing the Console | 35 |
The following illustration shows how the cable is positioned once it is installed.
Figure 20: Connecting the television cable
Connecting the Ethernet and Base Unit Data Cables
Both the Ethernet and base unit data cables pass through the cutaway opening at the upper right corner of the back plate and connect to nearby modular jacks in the console. Because of this, it is important to exercise caution when connecting the cables. The black Ethernet cable connects to a jack just underneath the perforated metal bracket at the very top of the opening in the console. The gray base unit data cable connects to a lower jack closer to the back plate.
Refer to the following illustration for the correct position of both cables.
CAUTION: If you connect the base unit data cable to the wrong jack, the equipment will not function.
