OPERATION
BIT STORAGE
See Figure 5.
When not in use, bits provided with the tool can be placed in the storage area located at the bottom of the tool handle.
INSTALLING BITS
See Figure 6.
nLock switch trigger on the tool by placing the direction of rotation selector in center position.
nSlide the coupler forward and hold in position.
nInsert bit straight into coupler.
nSlide the coupler back slowly and release.
REMOVING BITS
See Figure 6.
nLock switch trigger or the drill by placing the direction of rotation selector in center position.
nSlide the coupler forward and hold in position.
nPull bit straight out of coupler.
DRIVE BIT
BIT STORAGE AREA | ADAPTOR |
|
|
| |
| BIT | Fig. 5 |
ADAPTOR |
|
|
BIT |
|
|
COUPLER
Fig. 6
13