Ryobi P231 Product Specifications, Know Your Impact Driver, FORWARD/REVERSE Selector, Switch Lock

Page 8

 

FEATURES

PRODUCT SPECIFICATIONS

 

Motor

18 Volt DC

Coupler

1/4 in.

Gear Train

One Speed

Switch

Variable Speed

No Load Speed

0-2400/min.

Charger Input

120 V, 60 Hz, AC only

Charge Rate

1 Hour

Torque

Minimum 800 in.lb

Blows Per Minute

3000/BPM

BUILT-IN COUPLER

 

 

FORWARD/

 

REVERSE

SWITCH

SELECTOR

WITH CENTER

TRIGGER

LOCK

BIT STORAGE

Fig. 1

KNOW YOUR IMPACT DRIVER

See Figure 1.

Before attempting to use this product, familiarize yourself with all operating features and safety rules.

FORWARD/REVERSE SELECTOR

(DIRECTION OF ROTATION SELECTOR)

The impact-driver has a forward/reverse selector located above the switch trigger.

SWITCH LOCK

The switch trigger can be locked in the OFF position. This feature helps reduce the possibility of accidental starting when not in use.

VARIABLE SPEED

This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.

BIT STORAGE

When not in use, bits provided with the impact-driver can be placed in the storage area located on base of the handle.

BLOWS PER MINUTE

This tool features an impact speed of 3,000 Blows Per Minute (BPM). Blows Per Minute is the number of impacts per minute.

SWITCH TRIGGER

The impact-driver has a conveniently located variable speed switch trigger.

8

Image 8
Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Electrical SafetyPersonal Safety Work AreaSpecific Safety Rules ServiceSafety Rules for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONSymbol Signal Meaning Product Specifications Switch LockSwitch Trigger Know Your Impact DriverAssembly OperationUnpacking Packing ListCharging the Battery Pack Charging a Cool Battery PackTo Remove Battery Pack Charging a HOT Battery PackTo Install Battery Pack Reversible BUILT-IN CouplerInstalling Bits Removing BitsMaintenance General MaintenanceBattery Pack Removal Preparation for Recycling BatteriesPage Service Model NO. and Serial no