OPERATION
OPERATING THE LASER LEVEL
See Figures 9 - 10.
nPlace the level in the area where you want the laser line projected.
nIf a true vertical line or level horizontal line is desired, level the tool by centering the bubbles inside the vials located on top of the laser head.
NOTE: To ensure plumb lines or level hori- zontal lines across adjacent surfaces, level both vials and position the tool directly in front of the work area.
nTurn on the laser.
nRotate the laser head to position the laser line where needed.
nWith the laser beam pointed away from you, rotate the laser lens to achieve the desired angle of beam.
NOTE: Due to construction inaccuracy, walls may not be perfectly straight. This may cause the laser to have slight variances when in the level position.
TOP VIEW
CENTERED
LEVEL
Fig. 9
Fig. 10
14