Ryobi BGH625, BGH825, BGH615 Maintenance, General, Worklight Bulb Replacement, Wheel Dresser

Page 16

MAINTENANCE

WARNING:

When servicing, use only identical Ryobi replacement parts. Use of any other part may create a hazard or cause product damage.

GENERAL

Keep the bench grinder clean. Remove dust from working parts and beneath the grinder frequently.

Make sure the bench grinder operates properly. Check screws, nuts, and bolts for tightness.

10 WATT, 120 VOLT WORKLIGHT BULB

BGH625/BGH825

EXTENSION CORDS

The use of any extension cord will cause some loss of power. To keep the loss to a minimum and to prevent tool overheating, use an extension cord that is heavy enough to carry the current the tool will draw.

A wire gage size (A.W.G.) of at least 16 is recommended for an extension cord 25 feet or less in length. When working outdoors, use an extension cord that is suitable for outdoor use. The cord's jacket will be marked WA.

WARNING:

Check extension cords before each use. If damaged, replace immediately. Never use tool with a damaged cord since touching the damaged area could cause electrical shock resulting in serious injury.

 

TO REMOVE BULB

 

10 WATT, 120 VOLT

SLOT

WORKLIGHT BULB

TAB

TO INSTALL BULB

Fig. 12

WORKLIGHT BULB REPLACEMENT

For models BGH625 and BGH825, Figure 12.

To remove worklight bulb, gently push the bulb into the socket and turn counterclockwise. To install the new bulb, gently push the bulb into the socket and turn clockwise.

For model BGH615, Figure 13.

To remove bulb, turn counterclockwise. To install new bulb, turn clockwise.

Note: To avoid the risk of fire, never use a bulb with a wattage higher than 40.

WHEEL DRESSER

For models BGH625 and BGH825 ONLY.

Dressing a wheel is done to renew sharpness or to true up the face of the wheel.

Set the work rest of the bench grinder at a slight angle and brace the wheel dresser against it. Do not make contact with the grinding wheel until after you have turned on the motor and the wheel is rotating at full speed. Press the dresser slightly against the rotating wheel until you get a bite, then move slowly from side to side across the wheel. A small bite and many passes is better than a big bite and one pass. Work cautiously, hold the dresser with force on the work rest. Do not use excessive pressure against the grinding wheel. Proceed slowly until you master the technique.

Page 16

BGH615

TO

INSTALL BULB

40 WATT

WORKLIGHT

BULB

TO

 

REMOVE BULB

Fig. 13

 

Image 16
Contents Save this Manual for Future Reference Thank YOU for Buying a Ryobi Bench GrinderTable of Contents Product SpecificationsRules for Safe Operation Read ALL InstructionsFrequently clean grinding dust from beneath grind- er Symbol Meaning Safety Alert Symbol Electrical UnpackingExtension Cords Electrical ConnectionLoose Parts List Loose Parts List BGH615Loose Parts List BGH625 Loose Parts List BGH825Features BGH615 Features BGH625 Wheel Dressing ToolAUTO-ON Worklight Coolant TrayModel BGH825 Features BGH825See c Assembly Spark Deflector BGH615Spark Deflector BGH625 and BGH825 See Figures 4b and 4cShield Bracket Assembly Mounting Safety ShieldsSee Figure See Figures 6a 6cWork Rest BGH625 Work Rest BGH615Work Rest BGH825 Operation Basic OperationTwist Drill Bits Lawn Mower BladesWheel Replacement Chisels and Screwdriver BladesMaintenance Worklight Bulb ReplacementGeneral Wheel DresserPage Operators Manual Bench Grinder Ryobi Technologies INC

BGH615, BGH825, BGH625 specifications

Ryobi is renowned for producing high-quality power tools, and its bench grinder lineup, including the BGH625, BGH825, and BGH615 models, reflects this reputation. Each model is designed to provide exceptional performance and durability, making them ideal for both DIY enthusiasts and professionals.

The Ryobi BGH625 bench grinder features a robust 6-inch wheel diameter, making it suitable for a variety of grinding applications. Its powerful 2.1 Amp motor delivers sufficient torque to handle tough grinding tasks effortlessly. The BGH625 incorporates a flexible LED light, illuminating your workspace and allowing for precise work even in dimly lit areas. This model is equipped with protective eye shields that enhance safety while grinding, minimizing the risk of injury.

The BGH825 model takes performance a step further with its larger 8-inch wheels. This grinder is powered by a 3.0 Amp motor, providing increased power and efficiency. The BGH825 also features a built-in work light, which is adjustable to enhance visibility during operations. The extra-large cast iron base ensures stability while reducing vibrations, allowing for smoother grinding. Additionally, this model includes adjustable eye shields and a cooling tray to prevent overheating of workpieces.

For those seeking a more compact option, the BGH615 boasts a 6-inch wheel diameter but with a slightly different design focus. Weighing in at a lightweight build, the BGH615 is easy to transport and store, making it a great fit for small workshops or home use. The 2.1 Amp motor provides reliable power, and similar to its counterparts, it includes essential features like eye shields for safety.

All three models utilize Ryobi's advanced technology, ensuring long-lasting durability. The heavy-duty construction of the grinders allows them to withstand rigorous use, while easy-to-replace wheels make maintenance straightforward. Moreover, Ryobi backs its tools with a warranty that reflects the company's commitment to quality and customer satisfaction.

In summary, the Ryobi BGH625, BGH825, and BGH615 bench grinders offer varying features to meet different needs. With powerful motors, integrated lights, and solid safety features, these models are perfect for a range of grinding applications, making them valuable additions to any toolbox.