| SPECIFICATIONS |
Chuck | 1/2 in. (13 mm) Keyless |
Motor | 18 Volt DC |
Switch | Variable Speed |
Gear Train | 3 Speed |
No Load Speed | |
Hammer Speed | |
Clutch | 24 Positions |
Charger Input | 120 V, 60 Hz, AC only |
Charge Rate | 1 Hour |
Maximum Torque | 480 in./lb. |
|
|
| UNPACKING |
|
|
INSTRUCTIONS
This Cordless Hammer Drill has been shipped completely assembled.
■Carefully remove the tool and the accessories from the box.
■Make sure that all items listed in the packing list are included.
■Inspect the tool carefully to be sure no breakage or damage occurred during shipping.
■Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool.
■If any parts are damaged or missing, please call
PACKING LIST
Cordless Hammer Drill
2batteries Charging System
2Bits Operator's Manual
WARNING:
If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.
WARNING:
This tool should never be connected to a power supply when you are assembling parts, making adjustments, cleaning, performing maintenance, or when the tool is not in use. Disconnecting the tool will prevent accidental starting that could cause serious injury.
APPLICATIONS
You may use the cordless hammer drill for the purposes listed below:
Hammer drilling in concrete, brick, or other masonry.
Drilling in wood.
Drilling in ceramics, plastics, fiberglass, and laminates.
Drilling in both soft and hard metals.
Driving screws with screwdriver bits, using driving accessories.
Mixing paint.
Page 7