Ryobi HP1830M manual Features, Auxiliary Handle Assembly, Depth Gauge ROD

Page 8

FEATURES

KNOW YOUR HAMMER DRILL

See Figure 1.

Before using this product, familiarize yourself with all operating features and safety requirements. However, do not let familiarity with the tool make you careless.

KEYLESS CHUCK

This hammer drill has a heavy-duty keyless chuck that allows you to hand tighten or release drill bit in the chuck jaws.

SWITCH

This hammer drill has a conveniently located variable speed trigger switch.

SWITCH LOCK

The switch trigger can be locked in the OFF position. This feature helps reduce the possibility of accidental starting when not in use.

VARIABLE SPEED

This tool has a variable speed switch that delivers higher speed with increased trigger pressure. Speed is controlled by the amount of switch trigger depression.

THREE SPEED GEAR TRAIN

This hammer drill has a three-speed gear train. A slide switch is located on top of the drill to select either LO (1), HI (2) or SUPER-HI (3) speed.

FORWARD/REVERSE SELECTOR

(DIRECTION OF ROTATION SELECTOR)

The hammer drill has a forward/reverse selector located above the switch trigger.

AUXILIARY HANDLE ASSEMBLY

An auxiliary handle is installed on the hammer drill. For ease of operation, you may use the handle with either the left hand or the right hand.

DEPTH GAUGE ROD

A depth gauge rod is installed on the auxiliary handle assembly to assist you in controlling the depth of drilled holes.

BIT STORAGE

When not in use, bits provided with your drill-driver can be placed in the storage area located on the top of the motor housing.

Page 8

Image 8
Contents Operators Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Electrical SafetyPersonal Safety Work AreaSpecific Safety Rules ServiceImportant Rules for Battery Tools Additional Rules for Safe OperationImportant Safety Instructions for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONSpecifications UnpackingApplications InstructionsDepth Gauge ROD FeaturesAuxiliary Handle Assembly Features Adjusting the Depth Gauge ROD AdjustmentsAdjusting the Auxiliary Handle Assembly Adjusting the Torque Changing the BIT Rotation Inserting BitsRemoving Bits RightOperation Charging Your DRILL-DRIVERTo Charge LED Function of ChargerTurning ON/OFF the Hammer Drill ReversibleThree Speed Gear Train To Install Battery Pack To Remove Battery PackBIT Storage Electric BrakeDrilling Tightening the Chuck MaintenanceRemoving the Chuck Batteries Disposal of the Exhausted BatteryBattery Pack Preparation for Recycling Service Model NO. and Serial no