CONTENTS
Before using your new Power cutter
•Read the Operator’s Manual carefully.
•Check the assembly and adjustment of the cutting blade, see chapter ”Assembly”.
•Start the engine and check the carburettor settings. See chapter ”Maintenance”, section ”Carburetor”. When adjusted correctly the cutting blade should not rotate when idling. Setting the idling speed is described in the Operator’s Manual. Adjust the speed according to these instructions. Do not use the power cutter if the idling speed is not correctly adjusted!
•Let your Husqvarna dealer check the power cutter and carry out essential adjustments and repairs.
!WARNING!
Under no circumstances should you modify the original design of the power cutter without approval from the manufacturer. Always use genuine spare parts. Unauthorized modifications or accessories may lead to serious injury or death.
!WARNING!
Use of products which cut, grind, drill, sand or shape material can generate dust and vapors which may contain harmful chemicals. Know the nature of the material being worked on and wear appropriate dust mask or respirator protection.
List of Contents |
|
Symbol explanation | 2 |
Safety instructions |
|
Personal protective equipment | 4 |
The power cutter’s safety equipment | 4 |
Control, maintenance and service of the machine‘s safety |
|
equipment | 5 |
General safety instructions | 6 |
Transport and storage | 6 |
Fuel safety | 7 |
General working instructions | 7 |
Cutting | 7 |
Kickback | 8 |
Care and storage | 9 |
Cutting blades | 10 |
Abrasive discs | 10 |
Cutting blades | 11 |
Diamond blades | 11 |
What is what? |
|
What is what on a power cutter? | 12 |
Assembly |
|
Fitting the cutting head | 13 |
Checking the drive shaft and flanges | 13 |
Fitting the cutting blade | 13 |
Fuel handling |
|
Fuel mixture | 14 |
Fuelling | 14 |
Start and stop |
|
Start and stop | 15 |
Maintenance |
|
Adjusting the drive belt | 16 |
Changing the drive belt | 16 |
Carburettor | 17 |
Fuel filter | 18 |
Air filter | 18 |
Starter | 19 |
Spark plug | 20 |
Muffler | 20 |
Cooling system | 20 |
Daily maintenance | 21 |
Weekly maintenance | 21 |
Monthly maintenance | 21 |
Technical Data |
|
371K | 22 |
375K | 22 |
English – 3