MAINTENANCE
BATTERY REMOVAL, PREPARATION FOR RECYCLING MODEL SA60
See Figures 17 and 18.
TO REMOVE:
■Lock switch trigger by placing the forward/reverse switch in center position. See Figure 9.
■Remove battery cover from bottom of drill handle by depressing and pushing cover in the direction of the arrow.
See Figure 17.
■Slide battery cell assembly from drill handle enough to expose leads and battery terminals. Disconnect leads from battery terminals. See Figure 18.
Note: Be careful not to break battery terminals when disconnecting leads.
WARNING:
Upon removal, cover the battery cell assembly termi- nals with heavy duty adhesive tape. Do not attempt to destroy or disassemble battery cell assembly or remove any of its components. Also, never touch both terminals with metal objects and/or body parts, as short circuit may result. Keep away from children. Failure to comply with these warnings could result in fire and/or serious injury.
MODEL SA60
DRILL
HANDLE
TO
REMOVE COVER
BATTERY COVER
Fig. 17
MODEL SA60
DRILL
HANDLE
BATTERY
LEAD
BATTERY
LEADBATTERY TERMINAL
BATTERIES
Fig. 18
Page 19