Ryobi SA60, SA720 manual Table of Contents, Introduction

Page 2

 

TABLE OF CONTENTS

 

Introduction

2

General Safety Rules

3-4

Specific Safety Rules

4

Important Safety Instructions for Charger

5

Symbols

6

Specifications

7

Unpacking

7

Applications

7

Features

8-9

Adjustments

10-12

Operation

13-16

Maintenance

17-19

Parts Ordering / Service

20

INTRODUCTION

The Cordless Drill-Driver has many features for making the use of this product more pleasant and enjoyable. Safety, performance, and dependability have been given top priority in the design of this product making it easy to maintain and operate.

WARNING:

Do not attempt to use this product until you thoroughly read and completely understand the operator’s manual. Pay close attention to the safety rules, including Dangers, Warnings, and Cautions. If you use your product properly and only as intended, you will enjoy years of safe, reliable service.

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

WARNING:

The operation of any tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eye- glasses or standard safety glasses with side shields. Always wear eye protection which is marked to comply with ANSI Z87.1.

Page 2

Image 2
Contents Save this Manual for Future Reference Model SA60 Model SA720Table of Contents IntroductionGeneral Safety Rules Model Battery Pack ChargerSpecific Safety Rules ServiceImportant Safety Instructions for Charger Symbols Symbol Name DESIGNATION/EXPLANATIONApplications SpecificationsUnpacking InstructionsFeatures Level Torque Adjustment Ring BIT Model SA60Right AdjustmentsReversible See Figures 3 Installing BitsRemoving Bits WrongTo Decrease Torque Adjustable Torque ClutchTo Adjust Torque Screwdriver BitsOperation Charger Indicator Light LED Input Jack PlugBattery Chargerpack Input Jack Indicator Light LED Charging Your DRILL-DRIVERBattery Pack Port Latches Depress Latches To Release To Install Battery Pack Model SA720To Remove Battery Pack Model SA720 Important Information for RECHARG- ING HOT BatteriesSwitch DrillingLevel Drilling LevelChuck Removal MaintenanceGeneral MalletBatteries Battery Pack Removal and PREPARA- Tion for RecyclingTo Retighten a Loose Chuck Drill Handle Battery Lead Leadbattery Terminal Batteries Battery REMOVAL, Preparation for Recycling Model SA60Drill Handle Remove Cover Battery Cover See Figures 17Service Model NO. and Serial no