Ryobi RY6200 specifications Table of Contents, Accessories, Unpacking

Page 2

TABLE OF CONTENTS

 

Table of Contents

2

Accessories

2

Unpacking

2

Rules For Safe Operation

3-6

A. Important Safety Rules For Battery Tools

4

B. Important Safety Instructions For Charger

4-5

C. Important Safety Instructions For Circular Saws

5-6

Features

7

Operation

8-17

Maintenance

18

Battery Pack Removal and Preparation For Recycling

18

Parts Ordering / Service

20

Look for this symbol to point out important safety precautions. It means attention!!! Your safety is involved.

ACCESSORIES

The following recommended accessories are current and were available at the time this manual was printed.

5-1/2 in. (140 mm) Thin Kerf Blade

UNPACKING

Your circular saw has been shipped completely assembled except for the blade. Inspect it carefully to make sure no breakage or damage has occurred during shipping. If any parts are damaged or missing, contact your nearest Ryobi Authorized Service Center to obtain replacement parts before attempting to operate saw. A blade, blade wrench, and this operator's manual are also included.

WARNING:

If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

WARNING:

The operation of any power tool can result in foreign objects being thrown into your eyes, which can result in severe eye damage. Before beginning power tool operation, always wear safety goggles or safety glasses with side shields and a full face shield when needed. We recommend Wide Vision Safety Mask for use over eyeglasses or standard safety glasses with side shields. Always use eye protection which is marked to comply with ANSI Z87.1.

Page 2

Image 2
Contents Operators Manual Thank YOU for Buying a Ryobi Cordless Circular SAWUnpacking Table of ContentsAccessories Read ALL Instructions Symbol Meaning Safety Alert SymbolRules for Safe Operation When Servicing USE only Identical Replacement Parts Important Safety Rules for Battery ToolsDo not Charge Battery Tool in a Damp or WET Location Lower Blade Guard Important Safety Instructions for ChargerImportant Safety Instructions for Circular Saws Do not Operate Charger with a DamagedRules for Safe Operation Know Your Cordless Circular SAW FeaturesSwitch ApplicationsOperation To Install Battery Pack To Assemble or Remove BladeTo Remove Blade SAW BladesBlade Guard System To Lessen the Chance of Kickback KickbackKickback is Caused by KickbackStarting a CUT Depth of CUT AdjustmentTo Adjust Blade Depth To Help Maintain Control Width of CUT Scale RIP Cuts Base AssemblyTo Cross CUT or RIP CUT TOP View of SAW Guideline Front of SAW Blade Guide NotchGuard To Adjust Bevel SettingBlade Guide Notch Guideline To Check To AdjustPositive 0 Bevel Stop To Pocket CUTTo RIP CUT To Assemble Optional RIP GuideBatteries MaintenanceBattery Pack Removal and Preparation for Recycling Page 2 in. Cordless Circular SAW Model NO. RY6200