Features, Know Your Cordless Circular SAW, Switch

FEATURES

KNOW YOUR CORDLESS CIRCULAR SAW

See Figure 1.

Before attempting to use any tool, familiarize yourself with all operating features and safety requirements.

Features include easily operated bevel cut and depth of cut adjustment mechanisms; positive 0° bevel stop; spindle lock; and blade wrench storage.

APPLICATIONS

(Use only for the purpose listed below)

■Cutting all types of wood products (lumber, plywood, paneling).

SWITCH

Your saw is equipped with a lock-off button which reduces the possibility of accidental starting. The lock-off button is located on the handle above the switch trigger. You must depress the lock-off button in order to pull the switch trigger. The lock resets each time the trigger is released.

NOTE: You can depress the lock-off button from either the left or right side.

OPTIONAL RIP GUIDE SCREW (WING SCREW)

BLADE WRENCH (5 mm HEX KEY)

BLADE WRENCH

STORAGE AREA DEPTH OF CUT ADJUSTMENT

(DEPTH ADJUSTMENT KNOB)

SPINDLE

LOCK BUTTON

OPTIONAL RIP
GUIDE SCREW	50
	45
(WING SCREW)	30
(WING SCREW)	22

BEVEL CUT

ADJUSTMENT

(BEVEL ADJUSTMENT KNOB)

BASE

ASSEMBLY

LOCK-OFF

BUTTON

SWITCH

TRIGGER

UPPER

BLADE GUARD

LOWER

BLADE GUARD

BLADE

Fig. 1

WARNING: WARNING:

Always wear safety goggles or safety glasses with side shields when operating tools. Failure to do so could result in objects being thrown into your eyes, resulting in possible serious injury.

Do not allow familiarity with your circular saw to make you careless. Remember that a careless fraction of a second is sufficient to inflict severe injury.

Page 7