Ryobi manual Operators Manual 10 in mm Miter Saw Model TS1302, Ryobi TECHNOLOGIES, INC

Page 22

OPERATOR'S MANUAL 10 in. (254 mm) Miter Saw

Model TS1302

EXTENSION CORD CAUTION

When using a power tool at a considerable distance from a power source, be sure to use an extension cord that has the capacity to handle the current the tool will draw. An undersized cord will cause a drop in line voltage, resulting in overheating and loss of power. Use the chart to determine the minimum wire size required in an extension cord. Only round jacketed cords should be used.

When working with a tool outdoors, use an extension cord that is designed for outside use. This is indicated by the letters "WA" on the cord's jacket.

Before using any extension cord, inspect it for loose or exposed wires and cut or worn insulation.

**Ampere rating

(on tool data plate)

0-2.0

2.1-3.4 3.5-5.0 5.1-7.0

7.1-12.0

12.1-16.0

 

 

 

 

 

Cord Length

 

Wire Size (A.W.G.)

 

 

 

 

 

 

 

 

 

25'

16

16

16

16

14

14

 

 

 

 

 

 

 

50'

16

16

16

14

14

12

 

 

 

 

 

 

 

CAUTION: Keep the extension cord clear of the working area. Position the cord so that it will not get caught on workpiece, tools, or other obstructions while you are working with a power tool.

**Used on 12 gauge - 20 amp circuit.

• SERVICE

Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.

• MODEL NO.

The model and serial numbers of your tool will be found on a plate attached to the motor housing. Please record the serial number in the space provided below.

• MODEL NUMBER

TS1302

SERIAL NUMBER

RYOBI TECHNOLOGIES, INC.

1428 Pearman Dairy Road Anderson SC 29625

Post Office Box 1207 Anderson SC 29622-1207

Phone 1-800-525-2579

www.ryobitools.com

972000-955

9-02

Image 22
Contents Save this Manual for Future Reference Product Specifications Table of ContentsIntroduction Rules for Safe Operation Safety and International SymbolsDouble Insulation Read ALL Instructions Blade Coasts After Being Turned OFF Glossary of Terms for Woodworking FreehandUnpacking and Checking Contents Features Trigger Lock Miter Lock HandleSpindle Lock Button Positive Stops on Miter TableElectrical Connection Optional AccessoriesMounting Hole Trace Holes AT These Locations For Hole PatternDust Guide AssemblyTo Install Blade Miter TightenDust BAG See Figures 13, 14, Table ExtensionsStop Block See Figures 13Pivot Adjustments Travel Pivot Adjustment AdjustmentsAuthorized Service Center Fence Miter Table Squaring the Miter Table to the FenceSee Figures 17 Blade SlotFence Miter Blade Squaring the SAW Blade to the FenceSee Figures 21 Square with FenceCutting with Your Miter SAW OperationApplications CrosscuttingLong Workpiece Support Long WorkpiecesWorkpiece Supports Right Cutting Warped MaterialClamping Wide Workpieces Wrong Wide BoardLubrication MaintenanceGeneral Extension CordsTroubleshooting Problem Cause SolutionOperators Manual 10 in mm Miter Saw Model TS1302 Ryobi TECHNOLOGIES, INC