Ryobi TS1353DXL manual Service Model NO. and Serial no

Page 32

OPERATOR’S MANUAL

10 in. Compound Miter Saw

TS1353DXL - Double Insulated

• SERVICE

Now that you have purchased your tool, should a need ever exist for repair parts or service, simply contact your nearest Ryobi Authorized Service Center. Be sure to provide all pertinent facts when you call or visit. Please call 1-800-525-2579 for your nearest Ryobi Authorized Service Center. You can also check our web site at www.ryobitools.com for a complete list of Authorized Service Centers.

• MODEL NO. AND SERIAL NO.

The model number of this tool will be found on a plate attached to the motor housing. Please record the model number and serial number in the space provided below.

• HOW TO ORDER REPAIR PARTS

When ordering repair parts, always give the following information:

•	MODEL NUMBER	TS1353DXL
•	SERIAL NUMBER

RYOBI TECHNOLOGIES, INC.

1428 Pearman Dairy Road, Anderson, SC 29625

Post Office Box 1207, Anderson, SC 29622-1207

Phone 1-800-525-2579

www.ryobitools.com

983000-553

1-05

Image 32

Contents OPERATOR’S Manual Save this Manual for Future ReferenceTable of Contents IntroductionGeneral Safety Rules Read ALL InstructionsSpecific Safety Rules Specific Safety Rules Symbols Symbol Name DESIGNATION/EXPLANATIONService Electrical Double InsulationElectrical Connection Extension CordsGlossary of Terms Features Product SpecificationsSwitch Trigger Know Your Compound Miter SAWAMP Motor Blade Wrench StorageTools Needed Loose Parts List Mm HEX KEYMounting Holes AssemblyUnpacking To install the work clamp Dust GuideDust BAG Work ClampTable Extensions Stop BlockSee Figures 12 Miter SAW BaseTo Install / Replace the Blade See Figures 16Tighten blade bolt securely Replace the lower blade guard and blade bolt coverMounting the Laser Guide Aligning the Laser Guide LineSquaring the Miter Table to the Fence See Figures 20Squaring the Blade to the Fence See Figures 24Squaring the Blade to the Miter Table See Figures 28To Crosscut OperationApplications To Bevel CUT See Figures 32To Compound Miter CUT Compound Miter CUT Work ClampTo Support Long Workpieces See Figures 34Cutting Compound Miters Cutting Crown Molding Laying Molding Flat on the Miter TableSee Figures 38 Cutting Warped MaterialClamping Wide Workpieces Adjustments Pivot Adjustments Travel Pivot Adjustment Bevel Pivot Adjustment Depth Stop AdjustmentsMaintenance Positive Stop AdjustmentsGeneral Maintenance Brush ReplacementDo not attempt to activate the laser Changing the BatteriesSee Figures 44 Service Model NO. and Serial no