Ryobi BTS15 manual Operators Manual, Save this Manual for Future Reference

Page 1

OPERATOR'S MANUAL

10 in. (254 mm) TABLE SAW BTS15

Your new Table Saw has been engineered and manufactured to Ryobi's high standards for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

WARNING: To reduce the risk of injury, the user must read and understand the operator's manual before using this product.

Thank you for buying a Ryobi Table Saw.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1

Contents Save this Manual for Future Reference Operators ManualTable of Contents Rules for Safe Operation Symbol MeaningRead ALL Instructions Blades Coast After Turn OFF Before Making a CUT, be Sure ALL Adjustments are SecureSafety and International Symbols Double Insulation ElectricalElectrical Connection Extension CordsAnti-Kickback Pawls Fingers Glossary of TermsUnpacking Socket Adjustable WrenchTools Needed Wrench #2 Phillips Screwdriver Framing Square Socket WrenchKey Description Qty Loose Parts ListFollowing items are included with your table saw leg stand Getting to Know Your SAW FeaturesRiving Knife Operating Components Power SwitchProduct Specifications Speed and WiringBlades Precision Ground MICRO-GRAIN Carbide Teeth Blade RotationAssembling LEG Stand AssemblyAssembling Storage Brackets To Mount the Table SAW to the LEG Stand To Install the Blade Adjusting HandleTo Install Miter Table To Install RIP FenceTo Lock Miter Table RIP Fence Front Rail Table Lock KnobsTo Install Blade Guard Assembly To Check SAW Blade InstallationHoles Attachment Nuts Tabs Mounting PlateOperation HOW to Mount a Featherboard HOW to Make a FeatherboardFeatherboard Types of Cuts To Adjust the Blade Angle To Adjust the Blade DepthTo SET the Scale to the Blade To USE Solid Table Extension To USE Outfeed SupportTo Make a Cross CUT OutfeedTo Make a Miter CUT Switch KEYTo Make a Straight RIP CUT Blade RIP Fence OutfeedTo Make a Bevel RIP CUT To Make a Bevel Cross CUTMiter Fence RIP Fence Bevel Locking Lever To Make NON-THROUGH Cuts To Make a Compound Miter CUTTo Make Dado Cuts REMOVING/REPLACING the Throat Plate AdjustmentsTo Check the Alignment of the RIP Fence to the Blade Screw Clamp RIP Fence Blade Screws Locking HandleTo Remove the Blade Pawls Spreader Blade Aligning Spreader with the BladeBevel Bevel Locking Handle Lever To SET Blade AT 0 orTo Ajust the Sliding Miter Table Assembly To Check Miter Base Parallelism Checking Sliding Miter Table AssemblyTo Check Miter Fence Alignment Making Adjustments to Sliding Miter Table AssemblyTo Adjust QUICK-STOP To Adjust the Miter FenceMaintenance Problem Possible Cause Solution Trouble ShootingRyobi TECHNOLOGIES, INC Operators Manual 10 in mm Table Saw BTS15