Ryobi BTS15 Unpacking, Tools Needed, Wrench #2 Phillips Screwdriver Framing Square Socket Wrench

Page 9

UNPACKING

Your Model BTS15 Table Saw is shipped complete in one carton and includes a rip fence, a miter fence, and a blade guard.

Separate all parts from packing materials and check each one with the illustration and the list of Loose Parts to make sure all items are accounted for before discarding any packing material.

Important: Remove the foam block from between the saw's housing and the motor.

If any parts are missing, do not attempt to assemble the table saw, plug in the power cord, or turn the switch on until the missing parts are obtained and are installed correctly. Call 1-800-525-2579 for assistance if any parts are missing or damaged.

The saw is factory set for accurate cutting. After assem- bling it, check for accuracy. If shipping has influenced the settings, refer to specific procedures explained in the opera- tion and maintenance sections of this manual.

WARNING:

If any parts are missing, do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury.

TOOLS NEEDED

1/2 in.

WRENCH

#2 PHILLIPS

SCREWDRIVER

FRAMING SQUARE

SOCKET WRENCH

WITH 7/16 in.

SOCKET

ADJUSTABLE WRENCH

Fig. 1

Page 9

Image 9

Contents Save this Manual for Future Reference Operators ManualTable of Contents Rules for Safe Operation Symbol MeaningRead ALL Instructions Blades Coast After Turn OFF Before Making a CUT, be Sure ALL Adjustments are SecureSafety and International Symbols Double Insulation ElectricalElectrical Connection Extension CordsAnti-Kickback Pawls Fingers Glossary of TermsUnpacking Socket Adjustable WrenchTools Needed Wrench #2 Phillips Screwdriver Framing Square Socket WrenchKey Description Qty Loose Parts ListFollowing items are included with your table saw leg stand Features Getting to Know Your SAWRiving Knife Operating Components Power SwitchProduct Specifications Speed and WiringBlades Precision Ground MICRO-GRAIN Carbide Teeth Blade RotationAssembly Assembling LEG StandAssembling Storage Brackets To Mount the Table SAW to the LEG Stand To Install the Blade Adjusting HandleTo Install Miter Table To Install RIP FenceTo Lock Miter Table RIP Fence Front Rail Table Lock KnobsTo Install Blade Guard Assembly To Check SAW Blade InstallationHoles Attachment Nuts Tabs Mounting PlateOperation HOW to Make a Featherboard HOW to Mount a FeatherboardFeatherboard Types of Cuts To Adjust the Blade Depth To Adjust the Blade AngleTo SET the Scale to the Blade To USE Solid Table Extension To USE Outfeed SupportTo Make a Cross CUT OutfeedTo Make a Miter CUT Switch KEYTo Make a Straight RIP CUT Blade RIP Fence OutfeedTo Make a Bevel Cross CUT To Make a Bevel RIP CUTMiter Fence RIP Fence Bevel Locking Lever To Make NON-THROUGH Cuts To Make a Compound Miter CUTTo Make Dado Cuts REMOVING/REPLACING the Throat Plate AdjustmentsTo Check the Alignment of the RIP Fence to the Blade Screw Clamp RIP Fence Blade Screws Locking HandleTo Remove the Blade Pawls Spreader Blade Aligning Spreader with the BladeBevel Bevel Locking Handle Lever To SET Blade AT 0 orTo Ajust the Sliding Miter Table Assembly To Check Miter Base Parallelism Checking Sliding Miter Table AssemblyTo Check Miter Fence Alignment Making Adjustments to Sliding Miter Table AssemblyTo Adjust QUICK-STOP To Adjust the Miter FenceMaintenance Problem Possible Cause Solution Trouble ShootingRyobi TECHNOLOGIES, INC Operators Manual 10 in mm Table Saw BTS15