Ryobi C2600 warranty Using the Quick LOCK-RELEASE Lever and Vise Clamp To Loosen, To Tighten

ADJUSTMENTS

QUICK LOCK-RELEASE LEVER

See Figures 9 and 10.

The quick lock-release lever engages the vise clamp to be used along with the fence assembly to provide a vise for securing the workpiece to be cut. It also allows you to open and close the vise quickly without repetitive turning of the vise crank handle.

USING THE QUICK LOCK-RELEASE LEVER AND VISE CLAMP

TO LOOSEN

See Figure 9.

■Unplug your cut-off machine.

WARNING:

Failure to unplug cut-off machine could result in accidental starting causing possible serious personal injury.

■Release tension on the vise clamp by rotating the vise crank handle 1/2 to 1 turn counterclockwise.

■Lift up the quick lock-release lever as shown in figure 9 and pull back on vise crank handle to slide open the vise.

TO TIGHTEN

See Figure 10.

■Unplug your cut-off machine.

WARNING:

Failure to unplug cut-off machine could result in accidental starting causing possible serious personal injury.

■Push the vise crank handle forward to slide the vise clamp against the workpiece.

■Rotate the quick lock-release lever forward and push down as shown in figure 10 to engage its threads with the vise screw.

■Rotate the vise crank handle clockwise to tighten the vise clamp against the workpiece.

VISE CRANK

HANDLE

VISE	QUICK LOCK-RELEASE LEVER
CLAMP
	WITH THREADS NOT ENGAGED

Fig. 9

VISE CRANK

HANDLE

VISE

CLAMP

QUICK LOCK-RELEASE LEVER

VISE WITH THREADS ENGAGED SCREW

Fig. 10

Page 12