Grizzly G1095/G1096 Setup Safety, Items Needed for Setup, Unpacking, Description Qty

Page 15

SECTION 3: SETUP

Setup Safety

This machine presents serious injury hazards to untrained users. Read through this entire manu- al to become familiar with the controls and opera- tions before starting the machine!

Wear safety glasses dur- ing the entire setup pro- cess!

This machine and its com- ponents are very heavy. Get lifting help or use power lifting equipment such as a forklift to move heavy items.

Model G1095/G1096 1-HP Power Feeder

Items Needed for

Setup

The following items are needed to complete the setup process, but are not included with your machine:

Description		Qty
•	Straightedge 4'	1
•	Safety Glasses	1
•	Dust Collection System	1
•	4" Dust Hose	1

Unpacking

Your machine was carefully packaged for safe transportation. Remove the packaging materials from around your machine and inspect it. If you discover the machine is damaged, please imme- diately call Customer Service at (570) 546-9663 for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise, filing a freight claim can be difficult.

When you are completely satisfied with the condi- tion of your shipment, inventory the contents.

-13-

Image 15

Contents HP Power Feeder Ss ,EAD from Leadbased PAINTS Table of Contents Introduction Foreword Functional OverviewContact Info Machine Data Sheet Other Model G1096 Power Feeder 4 Roller / 4 Speed Phase Model G1095/G1096 1-HP Power Feeder Identification Controls and features Model G1095/G1096 1-HP Power Feeder !,7!93 53%3 %!2.2 02/4%#4/ %. /0%2!4.! -!#.%29 !,7!93 53% !.3 !002/6%$$ 3!&%49 ,!33%33 7%. /0%2!4 !,7!93 ,/#+ -/,% !3%3 & 53%$ % %&/2% /0%2!4. -!#.%29# 53%3!!2/5.$%$ %84%.3/..#/2$ 2!4%$4&/2/4%-!#.%!-0%2!%2 53%3 2%#/--%.$%$- !##%33/2%3 -!.9 -!#.%3 #!. %*%#4 7/2+0%#%3 4/7!2$ /0%2!4/2Additional Safety for Power Feeders Circuit Requirements 220V Single-Phase Operation G1095Nema 15-15 plug and receptacle 220V Three-Phase Operation G1096Unpacking SetupSetup Safety Items Needed for SetupBox Inventory Figures 4 Qty InventoryHardware Recognition Chart Assembled power feeder Model G1095/G1096 1-HP Power Feeder Clean Up AssemblyShaper Jointer Tablesaw Base MountingThrough-Bolt Mounting Test Run To test run the power feederOperations Operation Safety Basic Use and CareFt Per Min A, 40 Tooth + B To change the feed rate of your power feederChanging Speeds Ft Per Min A, 25 Tooth + BLubrication MaintenanceCleaning ScheduleTroubleshooting ServiceWheel Replacement Electrical Safety Instructions WiringElectrical IgZZEVhZ Feeder PartsDescription Stand and Support Assembly 22!.49 #!2$ 99.$5342!, .# 0//88 %,,.!- 7! Warranty and Returns #ALL 4ODAYD&ORO! &2%%