Assembly Instructions
Note: For additional information regarding the parts listed in the following pages, refer to the Assembly Diagram near the end of this manual.
1.
WARNING! Make sure the Power Switch on the Lamp Head (9) is in the “OFF” position and that the Lamp is unplugged from the electrical outlet before assembling or making any adjustments to the tool. (See Figure A, below.)
Figure A
2.Insert the Casters (3) into the ends of the Legs (2). Using a wrench (not included), use the included nuts, bolts and washers to fasten the Casters to the Legs. CAUTION: The Casters do not come with locks, so be sure to position the Lamp on a level surface during use to prevent rolling.
3.Set the four legs upright and using the Leg Bolts (4), washers and nuts, fasten each leg to the Bottom Pole (1). (See Figure B, below.)
| Figure B |
|
SKU 97641 | For technical questions, please call | Page 7 |