4.Slide the Top Pole (5) onto the top of the Bottom Pole (1), making sure the screw holes on the Top and Bottom Poles align. (See Figure C, below.) Using a Phillips Head screwdriver (not included), fasten the Top Pole to the Bottom Pole.
Figure C
5.Slide the Connector (6) onto the Top Pole (5). Use the handle to lock the Connector in place. Using the Connector Bolt (7) and Wing Nut (8), fasten the Lamp Head (9) to the Connector. Once the Lamp Head is set at the required angle and the Connector adjusted to the proper height, insert the plug at the end of the Power Cord (10) into the nearest outlet. (See Figure D, below.)
Figure D
SKU 97641 | For technical questions, please call | Page 8 |