Graco Inc 309511 operating instructions Operating Instructions, Model 245907, Series C

Page 1

Operating Instructions

Parts

This manual contains important warnings and information.

READ AND KEEP FOR REFERENCE.

INSTRUCTIONS

Pressure Roller Attachment

Model 245907, Series C

D9 in. (23 cm) roller frame with 45_ angle and 12 in. reach

D1/2 in. (13 mm) nap roller cover

3600 psi (24.8 MPa, 248 bar) Maximum Fluid Inlet Pressure *

*The best operating pressure is the lowest pressure that provides an even paint supply to the roller and typically does not exceed 300 psi (2.1 MPa, 21 bar).

CAUTION

Never leave water in the pump, gun, or pressure roller. Doing so could cause corrosion and damage from freezing. For storage, flush the system with Graco Pump Armort or mineral spirits/paint thinner.

309511

Rev. D

GRACO INC. P.O. BOX 1441 MINNEAPOLIS, MN 55440–1441

ECOPYRIGHT 2002, GRACO INC.

Graco Inc. is registered to I.S. EN ISO 9001

Image 1
Contents Model 245907, Series C Operating InstructionsEquipment Misuse Hazard Pressure Relief Procedure Operation Pressure Relief Procedure,Ceilings, Walls, and Woodwork Rolling TechniquesPressure Relief Procedure, Relieve the pressure CleaningStorage Roller Parts Parts ListAdditional Roller Covers Limited Warranty