Equipment Misuse Hazard

Warnings and Cautions

WARNING

Misuse can cause the equipment to rupture or malfunction and result in serious injury.

To help prevent injury

INSTRUCTIONS D Do not modify the extension tube or roller frame or use parts not designed for this equipment.

DDo not use 1,1,1–trichloroethane, methylene chloride, other halogenated hydrocarbon solvents or fluids containing such solvents in this or any other pressurized aluminum equipment. Such use could result in a chemical reaction, with the possibility of explosion.

FIRE AND EXPLOSION HAZARD

Improper grounding, poor ventilation, open flames or sparks can cause a hazardous condition and result in a fire or explosion and serious injury.

To help prevent injury from fire or explosion

DProvide fresh air ventilation to avoid the buildup of flammable fumes from flushing fluids or the coating being applied.

DKeep the application area free of debris, including solvent, rags, and gasoline.

FLUID INJECTION HAZARD

If high-pressure fluid pierces your skin, the injury might look like “just a cut”. But it is a serious wound. Get immediate medical attention.

To help prevent injection

DKeep your hands and body away form the roller frame when flushing. High pressure fluid emitted from the holes in the frame could cause an injection injury.

DAlways relieve pressure before you check or repair leaks and when you turn off pump or stop painting.

DNever use components rated less than system Maximum Working Pressure.

ELECTROCUTION HAZARD

Failure to observe the electrical hazards described below could result in serious injury, including burns or electrocution.

To help prevent harmful electrical shock

DAvoid contact with power lines.

DFollow all grounding instructions in your separate pump and gun instruction manual, and comply with all local, state, and national fire, electrical, and safety regulations.

DUse only MAGNUM or Graco paint hoses.

2309511