Graco Inc 245907, 309511 operating instructions Rolling Techniques, Ceilings, Walls, and Woodwork

Page 5

Rolling Techniques

1. Rolling vertically, roll out the letter “M”. (Fig. 2.)

Fig. 2

2. Cross roll, horizontally, to spread paint. (Fig. 3.)

Fig. 3

3. Finish with light, vertical strokes until the entire area has been covered, evenly. (Fig. 4.)

Fig. 4

Ceilings, Walls, and Woodwork

1. Ceilings: Using a paint brush, apply a starting

1. Woodwork & Walls: Using a brush, paint

row of paint approximately the width of your paint

woodwork first. Apply a starting row of paint

brush where the walls and ceiling meet. (Fig. 5.)

approximately the width of the paint brush around

 

the woodwork and where the walls meet the

 

ceiling. (Fig. 7.)

Fig. 5

2. With the roller, apply paint to the ceiling, working the short way of the room and applying as wide a strip as possible. (Fig. 6.)

Fig. 7

2. With the roller, apply paint to the walls, following the Roller Techniques described above. (Fig. 8.)

Fig. 6

Fig. 8

309511 5

Image 5
Contents Model 245907, Series C Operating InstructionsEquipment Misuse Hazard Pressure Relief Procedure Operation Pressure Relief Procedure,Ceilings, Walls, and Woodwork Rolling TechniquesStorage CleaningPressure Relief Procedure, Relieve the pressure Additional Roller Covers Parts ListRoller Parts Limited Warranty