Graco Inc 245907, 309511 operating instructions Pressure Relief Procedure

Page 3

Pressure Relief Procedure

WARNING

To help prevent injection injuries, follow this procedure whenever you stop painting.

psi/MPa/bar

1. Engage gun trigger safety latch.

2. Shut off power to pump.

3. Turn prime/spray valve to the PRIME to relieve pressure in system.

4. Remove gun trigger safety latch. Trigger gun to relieve any pressure in hose.

5. Engage gun trigger safety latch. Keep pump prime/spray valve in PRIME position until you paint again.

309511 3

Image 3
Contents Model 245907, Series C Operating InstructionsEquipment Misuse Hazard Pressure Relief Procedure Operation Pressure Relief Procedure,Ceilings, Walls, and Woodwork Rolling TechniquesCleaning Pressure Relief Procedure, Relieve the pressureStorage Parts List Roller PartsAdditional Roller Covers Limited Warranty