Multiquip GX390K1SM32 manual MRH-800GS Lubrication Chart

MRH800GS — MAINTENANCE

TABLE 8. MRH-800GS LUBRICATION CHART

ITEM	MAINTENANCE	FREQUENCY	TYPE	LOCATION
	NEEDED
Vibrator Oil	Replace Oil	Every 300 Hours of	SAE10W30 (1.5 liters)	see Figure 22
		Operation
			SAE#30 or SAE10W30
		Initially - After 10 to 20	(Spring - Summer)
Engine Oil	Replace Oil	Hours of Operation	SAE#20 or SAE10W30	see Figure 6
		Thereafter - Every 50 to	(Fall - Winter)
		100 Hours of Operation
			SAE10W30
			(Extremely Cold Region)
			Viscosity:
			ISO VG32 equivalent - for
			cold region
Hydraulic Oil	Replace Oil	Every 1000 to 1500 Hours	ISO VG46 or 56 equivalent	see Figure 7
		of Operation	- for warm region
			Shipped from factory with
			Shell Tellus 46
			(25 liters)
Travel Lever,	Add Lubrication
Vibration		Every 50 Hours of
	Oil to Sliding		Lubrication Oil	see Figure 4
Lever,		Operation
	Parts
Throttle Lever
Dead Man's	Lubricate Grease	Every 50 Hours of	Grease	see Figure 4
Device	Fitting	Operation
Handle Bar	Lubricate Grease	Every 50 Hours of	Grease	see Figure 37
Release Pin	Fitting	Operation
Bearing	Lubricate Grease	Every 50 Hours of	Grease	see Figures 35,36
Cover	Fitting	Operation
Clutch Box	Lubricate Grease	Every 50 Hours of	Grease	see Figure 38
	Fitting	Operation
Travel Lever	Lubricate Sliding	Every 50 Hours of	Grease	see Figure 4
	Parts	Operation
		Initially - After 25 Hours of
Oil Filter	Replace Oil Filter	Operation	Mikasa Genuine 10 micron	see Figure 39
		Thereafter - Every 500	Filter Paper
		Hours of Operation

PAGE 32 — MQ-MIKASA MRH800GS ROLLER — OPERATION AND PARTS MANUAL — REV. #5 (05/27/08)