Multiquip GX390K1SM32 manual MRH800GS Rules for Safe Operation

MRH800GS — RULES FOR SAFE OPERATION

■ALWAYS use extreme care when operating near obstructions, on slippery surfaces, grades and side slopes.

■When reversing, particularly on the edges and banks of ditches, as well as in front of obstacles, the operator must stay in a standing position at a safe distance from the machine.

■When operating near any house/building or pipelines, always check the effect of machine vibration. Stop the work if necessary.

■Unauthorized equipment modifications will void all warranties.

■Refer to the Engine Owner's Manual for engine technical questions or information.

■DO NOT operate the vibration roller with the front or rear cover open.

■Replace any worn or damaged vibration roller components immediately.

■ALWAYS turn the engine OFF before performing maintenance.

■ALWAYS make sure vibration roller is correctly secured to the trailer. Check all supports attaching the vibration roller to the trailer and make sure they are tight.

■ALWAYS keep the machine away from workers and obstacles. Also keep the immediate area free of bystanders.

■ALWAYS check the machine for loosened threads or bolts before starting.

■ALWAYS read, understand, and follow procedures in Operator’s Manual before attempting to operate equipment.

■ALWAYS be sure the operator is familiar with proper safety precautions and operations techniques before using vibration roller.

■A copy of this manual shall accompany the vibration roller at all times.

■DO NOT use worn out hoses or couplings; inspect daily.

■High Temperatures – Always stop engine and allow the engine to cool before adding fuel, oil or performing service and maintenance functions. Contact with hot components can cause serious burns.

■NEVER disconnect any "emergency or safety devices". These devices are intended for operator safety. Disconnection of these devices can cause severe injury, bodily harm or even death! Disconnection of any of these devices will void all warranties.

Emergencies

■ALWAYS know the location of the nearest fire extinguisher and first aid kit. Know the location of the nearest telephone. Also know the phone numbers of the nearest ambulance, doctor and fire department. This information will be invaluable in case of an emergency.

Maintenance Safety

■NEVER lubricate components or attempt service on a running machine.

■ALWAYS allow the machine a proper amount of time to cool before servicing.

■Keep the machinery in proper running condition.

■Fix damage to the machine immediately and always replace broken parts.

■Dispose of hazardous waste properly.Examples of potentially hazardous waste are used motor oil, fuel and fuel filters.

■DO NOT use food or plastic containers to dispose of hazardous waste.

■DO NOT pour waste, oil or fuel directly onto the ground, down a drain or into any water source.

Lifting

■The vibration roller has an operating weight of approximately 1530 lbs. (694 kg). Use lifting equipment capable of lifting this weight.

■Make sure the engine is off before lifting the machine.

■Use reliable cable in lifting the machine.

■Lift upright with sufficient bearing capacity to prevent machine from tilting or slipping.

■When lifting, keep the machine away from workers and animals.

MQ-MIKASA MRH800GS ROLLER — OPERATION AND PARTS MANUAL — REV. #5 (05/27/08) — PAGE 9