Ryobi TR31 specifications Save this Manual for Future Reference

Page 1

OPERATOR’S MANUAL

LAMINATE TRIMMER - MODEL TR31

DOUBLE INSULATED

SPECIFICATIONS:

Maximum Cutter Diameter

1-3/8 in. (34.9 mm)

Collet

 

1/4 in. (6.4 mm)

 

 

 

Horsepower

 

3/4

 

 

Rating

120 volts, 60 Hz AC only, 3.8 amperes

 

 

 

No Load Speed

 

23,000 RPM

 

 

 

Power Cord

 

10 ft. (3 m)

 

 

 

Net Weight

 

3.0 lbs. (1.4 kg.)

THANK YOU FOR BUYING A RYOBI LAMINATE TRIMMER.

Your new trimmer has been engineered and manufactured to Ryobi’s high standard for dependability, ease of operation, and operator safety. Properly cared for, it will give you years of rugged, trouble-free performance.

CAUTION: Carefully read through this entire owner’s manual before using your new trimmer.

Pay close attention to the Rules for Safe Operation, Warnings, and Cautions. If you use your trimmer properly and only for what it is intended, you will enjoy years of safe, reliable service.

Thank you again for buying Ryobi tools.

SAVE THIS MANUAL FOR FUTURE REFERENCE

Image 1
Contents Thank YOU for Buying a Ryobi Laminate Trimmer Save this Manual for Future ReferenceTypical Application Double Insulation Rules for Safe OperationWork Area Additional Rules for Safe Operation Unpacking FeaturesON-OFF Switch OFF Brush CAP Base AdjustmentsWrench Collet NUT Subbase ColletWing Bolt Indicator Points INSTALLING/REMOVING CuttersTo SET Depth of CUT Unplug Your TrimmerOperation Depth of CUT TOO Slow FeedingTOO Slow TOO Fast Depth Width CUT 1ST. Pass 2ND. PassExtension Cords Direction of Feed and ThrustSee Figures 8 Trimmer Feed DirectionThink Safety by Thinking Ahead AccessoriesSee Figures 12 Trimming with Subbase AccessoryWorkpiece See Figures 14 Routing Grooves Parallel to AN EdgeMaintenance Operators Manual Laminate Trimmer TR31