ACCESSORIES
HELPFUL HINTS |
| EDGE SHAPING WITH OPTIONAL TRIMMER GUIDE |
|
| |
✓ Always clamp workpiece securely before trimming. | ||
✓ A safe operator is one who thinks ahead. |
|
|
✓ Always wear eye protection when trimming. |
|
|
✓ Make setup adjustments carefully. Then double check. | ||
Measure twice and cut once. |
|
|
✓ Keep cutters clean and properly sharpened. |
|
|
✓ Don’t let familiarity make you careless. |
|
|
✓ Study all safety rules and do the job safely. |
|
|
✓ NEVER place your hands in jeopardy. |
|
|
✓ Make certain clamps can’t loosen while in use. |
|
|
✓ Test difficult setups on scrap — Don’t waste lumber. | ||
✓ Plan each operation before you begin. |
|
|
✓ Provide for smoother operation by cleaning | your | |
trimmer frequently. Shake trimmer or blow with an air | ||
jet to remove sawdust buildup. |
|
|
✓ THINK SAFETY BY THINKING AHEAD. |
| Fig. 10 |
|
|
|
Standard accessories included with your laminate trimmer are two wrenches. A subbase accessory with two handles is also included.
The following is a list of optional accessories available for your Laminate Trimmer:
Part No. | Description |
6072373 | Trimmer Guide |
4675208 | Straight Trim Bit |
6072063 | Straight Guide |
Fig. 11
WARNING:
Avoid hand positions that may expose fingers to cutter through open areas of trimmer base. See Figure 11.
Page 12