FEATURES
ON-OFF
SWITCH OFF
O N
ON
BRUSH CAP
BASE
MOTOR | WING BOLT |
HOUSING |
O F F
1 3/4 
1/2 
DEPTH OF 
CUT SCALE
WRENCH (2)
COLLET NUT
SUBBASE
ADJUSTMENTS
COLLET
Fig. 2
WARNING:
WARNING:
Your laminate trimmer should never be connected to power supply when you are assembling parts, making adjustments, installing or removing cutters, or when not in use. Disconnecting your trimmer will prevent accidental starting that could cause serious injury.
Do not use cutters that are larger in diameter than the opening in trimmer base. Use of such cutters will come in contact with the trimmer base and damage both the cutter and trimmer base. This situation could also cause possible loss of control or create other hazardous conditions that could cause possible serious personal injury.
WARNING:
Do not use cutters with undersized shanks. Undersized shanks will not tighten properly and could be thrown from tool causing injury.
Page 7