Harbor Freight Tools 55167 operating instructions Assembly Diagram

Page 24

Assembly Diagram

NOTE: Some parts are listed and shown for illustration purposes only and are not avail- able individually as replacement parts.

	SKU 55167	For technical questions, please call 1-800-444-3353;	Page 24
		Troubleshooting section at end of manual.

Image 24

Contents For technical questions and replacement parts, please call WelderContents Specifications General Safety RulesSave This Manual Work AreaElectrical Safety Personal SafetyTool Use and Care Service Specific Safety RulesPage Inhalation Hazard Welding Produces toxic fumes and gassesGrounded Tools Tools With Three Prong Plugs Plug and OutletDouble Insulated Tools Tools With Two Prong Plugs Prong Plug and Outlet Outlets for 2-Prong PlugSee Figure C, next See Figure CFigure C Assembly UnpackingInstalling the Wire Reel Wire Feed Roller Bracket Screws 45 Washers Trigger Switch Replacement Operation Before You Start WeldingDo not Switch the Current While Welding Holding The Torch HartC EttingsS eldW Material Thickness Steel Weld Diagnosis Weld Penetration Weld Not Adhering ProperlyBend at joint Porosity Crooked/wavy bead Excessive SpatterInaccurate welding Maintenance Parts Lists and Diagrams Wiring SchematicPlease Read the Following Carefully Assembly Diagram Page Troubleshooting Wire feed motor runs butwire does not feed properlyWire creates a bird’s nest During operation Welding arc not stablePower switch 7a does not light when switched on TroubleshootingFaulty or improperly connected Trigger Switch 1c Internal fuse blownWire Feeds, but arc does not ignite Weak Arc strength