Graco 312394V important safety instructions Ball Valve Repair, Assembly 255284 Shown

Page 25

Stainless Steel Tanks

503

506a

505 506b

506c

506d

503

504

Assembly 255284 Shown

ti12453a

1.Remove the stainless steel tanks from the base.

2.Remove four long screws (506d) holding the ball valve assembly together.

3.Remove three screws (505) holding the tank to the top plate of the ball valve assembly.

Ball Valve Repair

CAUTION

Disassembly of the ball valve is not recommended.

1. Remove ball valve from tank.

When the ball valve is removed from the tank, it is disassembled.

2. Check o-rings and replace as necessary.

2204 2202

2201

2203 2206

2204

ti12564a

2205

Repair

3.Reassemble and install the four screws that hold the ball valve assembly together. Follow ball valve removal from tank procedure in reverse order.

312394V

25

Image 25

Contents PR70 and PR70v Feed Systems Related Manuals ContentsPR7F Product ConfiguratorLow Volume Side Piston High Pressure, 3/8 in .5 mm 2.5 ft Code K Part Dispense Valve Code M Part Applicator Mounting Code Q Part High Volume Side Tank Cover Code Part Off-Board Tank Stands Electric Shock Hazard Fire and Explosion Hazard Grounding Polyethylene Tank Lid with Agitator InstallationLevel Sensors Pneumatic Agitator MotorPolyethylene Tanks Accumulators Stainless Steel TanksPressure Transducer and Flow Meter Installation Auto-Refill InstallationStartup Advanced Display Module Disabled ModePressure Relief Procedure Relieve pressure. See Pressure Relief Procedure, SetupLevel Sensor Calibration Stainless Steel Tanks Polyethylene TanksVacuum De-gas Vacuum De-gas and Vacuum Auto-Fill Accumulator Filling Shutdown Relieve pressure. See Pressure Relief Procedure onTank Removal RepairBall Valve Removal from Tank Ball Valve Repair Assembly 255284 ShownAgitator Fuse Replacement Accumulators, Assemblies LC0160 and LC0297 PartsAccumulators Ring Part Description QtyLiter Polyethylene Tanks Assembly 255282 Shown 224 211† ‹ Electric Agitator Assemblies 255246 Polyethylene Tank Agitators† Part not shown 801 802 808 813 823 805 824 804 807 806 814 822 Pneumatic Agitator AssemblyPart Description Agitator Shaft Tank Assemblies LC0237, LC0238 LC0254, and LC0255 On-Board Stainless Steel TanksPart Description Qty DescriptionQty Part Description QtyBall Valve, Assembly Flange Assembly Lid Assemblies LC0019 to LC0026 and LC0130 to LC0132 On-Board Stainless Steel Tank LidsLC0023, Lid assembly Agitator, De-gas Tanks for Use with Clampdown Covers Tanks for Use with Dust CoversLC0012 LC0235 LC0013 24U714 24U713 24U715Lid Assembly LC0018 Tank Assemblies LC0054 and LC0055 Off-Board Stainless Steel TanksTank Assemblies LC0259 and LC0260 Assembly LC0259 ShownPipe and Tube System Off-Board Stainless Steel Tank Lids Lid Assembly LC0101Lid Assembly LC0102 Parts 312394V Lid Assemblies LC0050, LC0144, LC0145, LC0146, LC0147 Assembly LC0147 ShownAgitator Quantity LC0050 LC0145 LC0146 LC0147 60 L LC0144 PneumaticAgitator Vacuum De-gas Part Description De-gas 60 L Port, 30 L Port, 60 LLid Assemblies LC0042, LC0043, LC0142, and LC0143 With Quantity LC0142 LC0143 Lid LC0043 Assembly LC0042Lid Assemblies LC0047, LC0048, LC0051, LC0052 Assembly LC0051 ShownFill NPT Vacuum Tree ManifoldParts 312394V Stainless Steel Tank Agitators Electric Agitator Motor AssemblyWasher Electric Agitator Motor, Assemblies 255337 Pneumatic Agitator Motor Assembly, 02/1116/50 Pneumatic Agitator Motor, 24J183 Pneumatic Agitator MotorAgitator Blade Assemblies 257607 Polyethylene Tanks Level Sensors Assembly LC0278 2103 2102 2101 2104 Stainless Steel Tanks Level SensorsKits Tank AccessoriesMixer and Shroud Options MD2 Valve KitsRefill Kits Vacuum KitsExternal Control Interface Connection Kit Machine with On-Board Tanks DimensionsPR70 PR70vMachine with Off-Board Tanks † Assembly Dimensions, in. mm TankPage Technical Data Graco Information Graco Standard Warranty