Mixer and Shroud Options, MD2 Valve Kits

Kits

Mixer and Shroud Options

LC0063 Mixer, 3/16 in. (6.5 mm) x 32, 10 Mixers with shroud

LC0057 Mixer, 1/4 in. (6.5 mm) x 24, 10 Mixers with shroud

LC0058 Mixer, 3/8 in. (9.8 mm) x 24, 10 Mixers with shroud

LC0059 Mixer, 3/8 in. (9.8 mm) x 36, 10 Mixers with shroud

LC0060 Mixer, 3/8 in. (9.8 mm) Combo, 10 Mixers with shroud

LC0061 Mixer, 3/16 in. (4.8 mm) x 32 Luer Lock, 10 Mixers with shroud

LC0062 Mixer, 1/4 in. (6.5 mm) x 24 Luer Lock, 10 Mixers with shroud

LC0077 Mixer, 3/16 in. (4.8 mm) x 32, 50 Mixers

LC0078 Mixer, 1/4 in. (6.5 mm) x 24, 50 Mixers

LC0079 Mixer, 3/8 in. (9.8 mm) x 24, 50 Mixers

LC0080 Mixer, 3/8 in. (9.8 mm) x 36, 50 Mixers

LC0081 Mixer, 3/8 in. (9.8 mm) combo, 50 Mixers

LC0083 Mixer, 1/4 in. (6.5 mm) x 24 Luer Lock, 50 Mixers

LC0082 Mixer, 3/16 in. (4.8 mm) x 32 Luer Lock, 50 Mixers

LC0084 Mixer, 3/16 in. (4.8 mm) x 32, 250 Mixers

LC0085 Mixer, 1/4 in. (6.5 mm) x 24, 250 Mixers

LC0086 Mixer, 3/8 in. (9.8 mm) x 24, 250 Mixers

LC0087 Mixer, 3/8 in. (9.8 mm) x 36, 250 Mixers

LC0088 Mixer, 3/8 in. (9.8 mm) combo, 250 Mixers

LC0089 Mixer, 3/16 in. (4.8 mm) x 32 Luer Lock, 250 Mixers

LC0090 Mixer, 1/4 in. (6.5 mm) x 24 Luer Lock, 250 Mixers

See MD2 Dispense Valve instruction manual refer- enced at the beginning of this manual for installa- tion instructions or for more information.

255217 MD2, kit rebuild, air cylinder

255218 MD2, kit rebuild, back-end of wet section (no needle or seat)

255219 MD2, Soft Seat rebuild, needle and nose

255220 MD2, convert Soft Seat nose to Hard Seat (Hard Seat rebuild), needle and nose

See the PR70 and PR70v Repair - Parts manual referenced at the beginning of this manual for parts included in each kit.

LC0091 3.0 in. Air Cylinder rebuild kit LC0092 4.5 in. Air Cylinder rebuild kit

LC0093 Check Valve rebuild kit, Stainless Steel Ball LC0318 Check Valve rebuild kit, Carbide Ball LC0094 Rear Pump Seal rebuild kit

LC0097 Desiccant Dryer, 3/8 in. NPT with adapter and cartridge

LC0098 Desiccant Dryer refill cartridge

LC0095 Nitrogen Harness Kit for 30 L and 60 L tank, 1 tank

LC0096 Nitrogen Harness Kit for 30 L and 60 L tank, 2 tanks

†LC0099 Vacuum Transfer Pump, 120V, down to 25 Torr

†LC0100 Vacuum Transfer Pump, 240V, down to 25 Torr

†Item includes only the pump. A vacuum kit must be pur- chased to install the pump onto the tank.

Kit includes all parts needed to connect a nitrogen tank to the material tank.

312394V