Hobart Welding Products 400, ICE-27C manual California Proposition 65 Warnings

Page 7

1-3. Additional Symbols For Installation, Operation, And Maintenance

HOT PARTS can cause severe burns.

DDo not touch hot parts bare handed.

DAllow cooling period before working on torch.

MOVING PARTS can cause injury.

DKeep away from moving parts such as fans.

DKeep all doors, panels, covers, and guards closed and securely in place.

FLYING METAL can injure eyes.

DWear safety glasses with side shields or face shield.

MAGNETIC FIELDS can affect pacemakers.

DPacemaker wearers keep away.

DWearers should consult their doctor before go- ing near plasma arc cutting operations.

OVERUSE can cause OVERHEATING.

DAllow cooling period; follow rated duty cycle.

DReduce amperage (thickness) or reduce duty cycle before starting to cut again.

FIRE OR EXPLOSION hazard.

D Do not locate unit on, over, or near combustible surfaces.

DDo not install unit near flammables.

DDo not overload building wiring − be sure power supply system is properly sized, rated, and protected to handle this unit.

STATIC (ESD) can damage PC boards.

DPut on grounded wrist strap BEFORE handling

boards or parts.

D Use proper static-proof bags and boxes to store, move, or ship PC boards.

H.F. RADIATION can cause interference.

DHigh frequency (H.F.) can interfere with radio navigation, safety services, computers, and communications equipment.

DHave only qualified persons familiar with elec- tronic equipment perform this installation.

DThe user is responsible for having a qualified electrician promptly correct any interference problem resulting from the installation.

DIf notified by the FCC about interference, stop using the equipment at once.

DHave the installation regularly checked and maintained.

DKeep high-frequency source doors and panels tightly shut, keep spark gaps at correct setting, and use grounding and shielding to minimize the possibility of interference.

EXPLODING HYDROGEN hazard.

DWhen cutting aluminum underwater or with the water touching the underside of the aluminum, free hydrogen gas may collect under the work- piece.

DSee your cutting engineer and water table instructions for help.

FALLING UNIT can cause injury.

DUse lifting eye to lift unit only, NOT running gear, gas cylinders, or any other accessories.

DUse equipment of adequate capacity to lift unit.

DIf using lift forks to move unit, be sure forks are long enough to ex- tend beyond opposite side of unit.

ARC CUTTING can cause interference.

DElectromagnetic energy can interfere with sensitive electronic equipment such as computers and computer-driven equipment such as robots.

DTo reduce possible interference, keep cables as short as possible, close together, and down low, such as on the floor.

DLocate cutting operation 100 meters from any sensitive electronic equipment.

DBe sure this cutting power source is installed and grounded according to this manual.

DIf interference still occurs, the user must take extra measures such as moving the machine, using shielded cables, using line filters, or shielding the work area.

1-4. California Proposition 65 Warnings

YWelding or cutting equipment produces fumes or gases which contain chemicals known to the State of California to cause birth defects and, in some cases, cancer. (California Health & Safety Code Section 25249.5 et seq.)

YBattery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Wash hands after handling.

For Gasoline Engines:

YEngine exhaust contains chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm.

For Diesel Engines:

YDiesel engine exhaust and some of its constituents are known to the State of California to cause cancer, birth defects, and other reproductive harm.

OM-203 653 Page 3

Page 6 Page 8
Image 7
Page 6 Page 8
Contents Processes OM-203 653GDescription From Hobart to You Table of Contents Page Cutting can cause fire or explosion Symbol UsageMarks a special safety message Plasma Arc Cutting HazardsNoise can damage hearing Exploding Parts can injureFlying Sparks can cause injury ARC Rays can burn eyes and skinCalifornia Proposition 65 Warnings EMF Information Principal Safety StandardsAbout Pacemakers Identifie un message de sécurité particulier Signification des symbolesLE Coupage présente un risque de feu ou d’explosion UNE Décharge Électrique peut entraîner la mortLE Plasma D’ARC peut entraîner des blessures Risque de blessure en casLE Bruit peut endommager l’ouïe LES Fumées ET LES GAZ peuvent être dangereuxDES Particules Volantes peuvent blesser les yeux LES Bouteilles peuvent exploser si elles sont endommagéesDES Pieces Chaudes peuvent pro- voquer des brûlures graves DES Organes Mobiles peuvent provoquer des blessuresInformation sur les champs électromagnétiques Principales normes de sécuritéConsignes relatives aux stimulateurs cardiaques I1max − DefinitionsI1eff Duty Cycle And Overheating − InstallationSpecifications Specifications For TorchMovement Location And Airflow Torch Dimensions And WeightDimensions And Weight Selecting a LocationConnecting Gas/Air Supply Connecting Input Power Connecting Work ClampInstalling Alternative Plug 60 PSI Setting Gas/Air Pressure− Operation ControlsCutting Speed Trigger Safety LockSparks go thru metal Sequence Of OperationMonths − Maintenance & TroubleshootingChecking Torch Shield Cup Shutdown System Always turn Off power when changing or checking consumablesTorch Connections Torch And Work Cable ConnectionsWork Cable Connections Checking/Replacing Retaining Cup, Tip, And Electrode Turn Off power source before checking torch partsTroubleshooting Power Source Reset unit Go to Section Troubleshooting TorchCircuit Diagram − Electrical DiagramOM-203 653 Main Assembly − Parts ListDia Part Description Quantity Mkgs Torch, ICE-27C Page Page Support ServiceHobart Welding Products Contact your Distributor for

ICE-27C, 400 specifications

Hobart Welding Products has long been a respected name in the welding industry, and the Hobart 400, ICE-27C is a prime example of their dedication to quality and performance. This machine is engineered to meet the demanding needs of both amateur welders and seasoned professionals, offering versatility and reliability in a compact design.

One of the key features of the Hobart 400, ICE-27C is its powerful performance. With a robust power output, it can handle a wide range of materials, from thin sheet metal to heavier gauges. This capability makes it suitable for various applications, including automotive repair, fabrication, and industrial work. The machine supports multiple welding processes, including MIG and Flux-Cored welding, giving users the flexibility to choose the most effective method for their specific projects.

The advanced technology incorporated into the Hobart 400, ICE-27C is evident in its inverter design, which ensures energy efficiency and a lightweight, portable unit. This inverter technology allows for smooth, stable arcs and minimizes spatter, resulting in cleaner welds. Additionally, the unit offers adjustable parameters, enabling welders to customize their settings according to the task at hand, promoting precision and control.

Safety is a paramount consideration in the design of the Hobart 400, ICE-27C. The machine is built with user-friendly features such as an easy-to-read display and intuitive controls, allowing for a straightforward operating experience, even for novices. It also includes thermal overload protection to safeguard the unit against overheating, ensuring durability and longevity.

Portability is another important characteristic of the Hobart 400, ICE-27C. Weighing significantly less than traditional welding machines, it can be easily transported to various job sites. The compact design makes it ideal for both shop and field applications, catering to the needs of mobile welders.

In summary, the Hobart Welding Products 400, ICE-27C combines powerful performance, advanced technology, and safety features in a portable package. Whether for professional use or for hobbyists looking to take their skills to the next level, this welding machine stands out as a reliable choice that embodies Hobart's commitment to quality and innovation in welding solutions. It's a tool that not only meets but often exceeds the expectations of its users in the welding community.
Top Page Image Contents