Delta 36-865 instruction manual Assembly Tools Required, Assembly Time Estimate

		ASSEMBLY
ASSEMBLY TOOLS REQUIRED
3/8" Wrench	7/16" Wrench	4mm Hex Wrench
5/16" Wrench	1/2" Wrench	Phillips Screwdriver

ASSEMBLY TIME ESTIMATE

Approximately 2-4 hours

The Versa-FeederTMcan be assembled as shown in Figs. 3 or Fig. 4, depending on the operation and type of wood- working machine on which the stock feeder will mount. The following instructions pertain to the assembly in Fig. 3.

IMPORTANT: Familiarize yourself with the following assembly instructions and the components of the machine. If you wish to assemble the stock feeder in the arrangement shown in Fig. 4, minor variations in the assembly instructions are detailed on page 13.

Fig. 3

Fig. 4

1.Attach the pivot ball (A) Fig. 5 on the end of the overarm (B) with a 3/8" lockwasher (C) and 3/8-16 x 1" hex head screw (D). Tighten with the supplied hex wrench (E) Fig. 6.

NOTE: Make certain that the screw (C) and lockwasher are recessed inside the pivot ball (A) Fig. 6.

B

A

C

D

C

E

Fig. 5

Fig. 6

9