Chicago Electric 97717 operating instructions Maintenance Servicing

Page 12

Switch (13) to its “OFF” position and wait about 10 minutes. Then restart the Welder. (See Assy. Diagram.)

11.When the weld is complete, lift the electrode clearly away from any grounded object. Set the Welding Shield down, and turn the power Switch (13) to its “OFF” position.

(See Assy. Diagram.)

12.Unplug the Power Cord (8) from the electrical outlet.

(See Assy. Diagram.)

13.Remove the clamped Ground Cable from the object it is clamped onto. Then remove the electrode from the Electrode Holder (9).

(See Assy. Diagram.)

14.Clean and store the Arc Welder indoors out of reach of children and other unauthorized people.

15.IMPORTANT: Please read the included “Weld Diagnosis Pamphlet” for tips and suggestions concerning welding and proper usage.

WARNING To prevent serious injury

from accidental operation:

Turn the Power Switch of the tool to its “OFF” position and unplug the tool from its electrical outlet before performing any inspection, maintenance, cleaning, or storage procedures.

1.BEFORE EACH USE, inspect the general condition of the Arc Welder. Check for cracked or missing insulators, damaged electrical wiring, and any other condition that may affect its safe operation. If abnormal noise or vibration occurs, have the problem corrected before further use.

Do not use damaged equipment.

2.After Use, clean external surfaces of the Arc Welder with a clean cloth. Use compressed air to blow all dust and debris from the ventilation openings. Do not hold the air nozzle too close to the ventilation openings.

3.AFTER USE, store the Arc Welder in a clean, dry, safe location out of reach of children and unauthorized people.

4.WARNING! If the supply cord of this Arc Welder is damaged, it must be replaced only by a qualified service technician.

Maintenance And

Servicing

Procedures not specifically explained in this manual must be performed only by a qualified technician.

SKU 97717

For technical questions, please call 1-800-444-3353.

Page 12

Image 12
Contents For technical questions or replacement parts, please call Distributed exclusively by Harbor Freight ToolsContents General Safety Rules Work area safetySave This Manual Personal safety Power tool use and careSpecific Safety Rules ServiceFor technical questions, please call For technical questions, please call For technical questions, please call Specifications Initial Set Up InstructionsAssembly UnpackingShould be worn when using Figure BSee Assy. Diagram DiagramSKU For technical questions, please call Maintenance Servicing Troubleshooting Parts list and assembly diagram 4 1 2 1 1 1Limited 1 Year / 90 day warranty Record Product’s Serial Number Here