Chicago Electric 97717 Save This Manual, General Safety Rules, Work area safety

Page 3

Save This Manual

Keep this manual for the safety warnings and precautions, assembly, operating, inspection, maintenance and cleaning procedures. Write the product’s serial number in the back of the manual near the assembly diagram (or month and year of purchase if product has no number). Keep this manual and the receipt in a safe and dry place for future reference.

Important SAFETY

Information

In this manual, on the labeling, and all other information provided with this product:

This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that follow this symbol to avoid possible injury or death.

Danger

DANGER indicates

a hazardous

situation which, if not avoided, will result in death or serious injury.

WARNING WARNING

indicates a

hazardous situation which, if not avoided, could result in death or serious injury.

CAUTION CAUTION, used with the safety

alert symbol, indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.

 

 

NOTICE is used to

Notice

 

address practices

 

not related to personal injury.

 

 

CAUTION, without

Caution

 

 

the safety alert

 

 

symbol, is used to address practices not related to personal injury.

General Safety Rules

WARNING! Read all instructions Failure to follow all instructions listed below may result in electric shock, fire, and/or serious injury. The term “power tool” in all of the warnings listed below refers to your line-operated (corded) Arc Welder.

SAVE THESE INSTRUCTIONS

1.Work area safety

a.Keep work area clean and well lit. Cluttered or dark areas invite accidents.

b.Do not operate power tools in explosive atmospheres, such as in the presence of flammable liquids, gases or dust. Power tools create sparks which may ignite the dust or fumes.

c.Keep children and bystanders away while operating a power tool. Distractions can cause you to lose control.

2.Electrical safety

a.Avoid body contact with grounded surfaces such as pipes, radiators, ranges and refrigerators. There is an increased risk of electric shock if your body is grounded.

SKU 97717

For technical questions, please call 1-800-444-3353.

Page 3

Image 3
Contents Distributed exclusively by Harbor Freight Tools For technical questions or replacement parts, please callContents General Safety Rules Work area safetySave This Manual Power tool use and care Personal safetyService Specific Safety RulesFor technical questions, please call For technical questions, please call For technical questions, please call Unpacking SpecificationsInitial Set Up Instructions AssemblyFigure B Should be worn when usingSee Assy. Diagram DiagramSKU For technical questions, please call Maintenance Servicing Troubleshooting 4 1 2 1 1 1 Parts list and assembly diagramRecord Product’s Serial Number Here Limited 1 Year / 90 day warranty