Diamond CC1800 manual Brake, Weight Bars

Page 24

4. Turn off the water pump.

Brake

The brake (optional item) stops the saw from moving forward or backward unintentionally. DO NOT assume at any time the transmission will act as a brake when at Neutral. Note: On extreme slopes chock the tires to prevent unnecessary saw movement.

1.Push the brake pedal down and pivot it into the left brake groove (on the frame) to engage the brake.

2.Push the brake pedal down and pivot it into the right brake groove (on the frame) to disengage the brake.

Weight Bars

The weight bars provide additional weight to the front of the saw to improve overall performance. The combined weight is approximately 26 lb.

Figure 24: Weights

1.Secure the weight bars to the front of the frame base.

2.Remove the screws to remove the weight bars.

Image 24

Contents Operator’s Manual ‘Whatever It Takes’Page Table of Contents References Safety Precautions Safety AlertsProposition Spark Arrester RequirementGeneral Safety Battery and Electrical SafetyBlade Safety Blade Guard SafetyFuel Safety Engine/Motor SafetyCutting Safety Hydraulic SafetyBelt Safety Transporting SafetyLifting Safety Page Introducing the CC1800XL ComponentsControls Controls Shown AboveDimensions Dimensions for saw with optional water tank not shownSpecifications CC1800XL SpecificationsAdjusting the Handlebars Adjusting the Front PointerOperating the CC1800XL HandlebarsBattery Gas Model Diamond BladesInstalling the Blade WrenchInstalling the Blade Guard Blade GuardRemoving the Blade Flange Guard Water SystemHandwheel Speed Control LeverTransmission Lever Fuel System Gas Model Engine/MotorTasks Prior to Starting the Engine/Motor Starting the Engine/MotorStopping the Engine/Motor Concrete Cutting Helpful Hints Prior to CuttingTasks Prior to Cutting Continuing a Partial-CutWeight Bars BrakeMaintenance Overview Maintaining the CC1800XLPart Lubrication Inner Blade Flange WheelsBattery Type Servicing the BatteryElectrical System Disconnecting the Hydraulic Ball Valve Connecting the Hydraulic Ball ValveAdjusting the Speed Control Lever Hydraulic Ball Valve Hydraulic ModelAdjusting the Drive Wheels Adjusting the Rear Drive ChainTransmission BeltsTensioning the Blade Drive Belts Replacing the Blade Drive BeltsReplacing the Transmission V-Belt Cleaning the Engine/Motor Fuel Filter GX620 HondaStoring Replacing the Fuel FilterDisposal References Appendix aSerial Tags Daily Maintenance Task Chart Appendix BBelt Tension Settings Appendix CTroubleshooting Appendix DAppendix E Diamond Products Limited