![](/images/new-backgrounds/1240783/24078335x1.webp)
W1816 Owner's Manual (Mfg. Since 10/09)
SETUP
11.Slide the four lower stand legs onto the leg connectors, then connect them with (16)
3⁄4" hex bolts and (16) 3⁄8" flat washers, as shown in
Figure 16.
12.Attach the lower rear stand brace to two of the lower stand legs with (2)
(2)3⁄8" flat washers, as shown in Figure 17.
Note: Choose which side of the machine you will be rolling the collection drum away from to empty it, then install this lower rear stand brace on the opposite side.
13.Connect the two side stand braces to the lower stand legs with (4)
14.With the help from several other people, tip the dust collector
Lower
Stand Leg
Connector
x 16
Figure 16. Lower stand leg attached to
the leg connector.
Lower Rear
Stand Brace
x 2
Figure 17. Lower rear stand brace attached to the lower stand legs.
Side
Braces
x 4