Woodstock W1816 owner manual Installing the collection drum

W1816 Owner's Manual (Mfg. Since 10/09)

20. Install the three drum lid latch assemblies with (6) #10-24 x 3⁄8" Phillips head screws and (6) #10-24 hex nuts, as shown in Figure 24.

Note: To avoid snagging the plastic collection bag in the future, insert the screw from inside the drum.

x 6

	Figure 24. Installing the collection drum
		latch assemblies.
21. Insert the collection drum vacuum pipe through the
		Vacuum
side of the bottom drum, as shown in Figure 25,
then secure it in place with (4) 5⁄16"-18 x 3⁄4 hex		Pipe
bolts and (4) 5⁄16" flat washers.

x 4

Figure 25. Collection drum vacuum pipe

installed.

22. Place the collection drum vacuum beveled plate on the bottom of the drum assembly with the widest diameter of the plate facing up (see Figure 26).

Figure 26. Inserting the collection drum

vacuum plate.

-19-

SETUP