Support Column |
| Fan / Motor |
|
|
|
|
|
|
There is one support column that holds the col- lector body & fan/motor assembly and the collec- tor. Attach it to the base plate using the four (4) 5⁄16" - 18 x 3⁄4" hex bolts provided. Figure 3.
The collector body includes the fan assembly, switch, and motor which are preassembled at the factory. Set the collector body on top of the upper column plate so the intake portion faces the long portion of the base. Secure the collector body to the base plate with four (4) 5⁄16" - 18 x 3⁄4" bolts, 5⁄16" - 18 nuts, and 5⁄16" washers provided. Figure 4.
Figure 3.
Figure 4.
|
|
|
|
|
|
|
|
|
|
|
|
G1032 Dust Collector | |||