Unpacking Piece Inventory | Grizzly G1032 specs

G1032 Dust Collector

G1032 Dust Collector

Unpacking		Piece Inventory

The Model G1032 Dust Collector is shipped from the manufacturer in a carefully packed carton. If you discover the machine is damaged after you’ve signed for delivery, please call Customer Service immediately for advice.

Save the containers and all packing materials for possible inspection by the carrier or its agent. Otherwise filing a freight claim can be difficult.

Caution: This Dust Collector is a relatively heavy and awkward machine (78 lbs). DO NOT over- exert yourself while unpacking or moving your machine – get assistance. In the event that your Dust Collector must be moved up or down a flight of stairs, be sure that the stairs are capable of supporting the combined weight of people and the machine.

When you are completely satisfied with the con- dition of your shipment, you should inventory its parts.

After all the parts have been removed from the carton, you should have:

•Motor / Fan Assembly

•Base

•Collection/Filter Bags

•Lower Support Column

•Casters (4)

•Rubber Gasket

•Hex Bolts 1⁄4"-20 x 1⁄2" (6)

•Hex Bolts 5⁄16"-18 x 3⁄4" (8)

•Phlp Hd Screws 10-24 x 1⁄2" (16)

•Nuts 5⁄16"-18 (4)

•Flat Washers 5⁄16" (4)

•Allen Wrench 4mm

•Allen Wrench 5mm

In the event that any non-proprietary parts are missing (e.g. a nut or a washer), we would be glad to replace them, or, for the sake of expedi- ency, replacements can be obtained at your local hardware store.